Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
Hello,I am looking for a standalone AP that can have seperate guest SSID. We have about 20-30 devices connected on a given day. I've looked at 1140, 1260 but not sure what exactly the differences are besides one has internal antenna. There are also o...
Is there any specfications I should be looking for when buying a Microwave oven. The question being is one better then another for interfernce on my WLAN?Thanks
IS H-REAP thet best way to secure traffic from one your WLC to a remote AP? example, I have a place with a T1 connection and only 2 AP's...The traffic has to be encrypted, from the AP to the Controller, not just from the client to the controller.hope...
Is it better to use external DHCP for AP's or is it best to assign static IP on each acces point. Currenlty I've got 4 1142 AP's and they are on dynamic IP. Thanks
Hi All,I have a WLC 5508, its PS1 and PS2 are OFF state, SYS is blinking amber and ALM is continues amber,Its port s are not coming UP and I am not able to access the Controller, All ports are physically down andin console nothing is showing when I c...
Can I configure the 2504 to send email notifications for particular alerts? how?
Hello, can you explain to me how to safely remove the WiSM2 from the Catalyst 6500 series switch?According to the documentation "Catalyst 6500 Series Wireless Services Module 2 Installation and Verification Note":-------------------------------------...
Hi All, I have 60 laptop users in my office. is there any AP supports 60 hosts at a time.how many clients will support for AP 3500 with 802.11NRegards,Ajith
According to Fluke, the latest versions of their Spectrum XT and the latest versions of Cisco's Spectrum Expert are no longer file compatible. A client of ours is requesting delivery of survey data in Cisco Spectrum Expert format however we have alre...
Management IP addresses of controllers the LAP remembers previouslyWhere is the previously management IP address of controllers saved by the AP's system? NVRAM? I issue dir nvram: commands and observe that in that NVRAM there are 3 files: startup_con...
Hi I am looking for a decent guide on how to configure the following to all work togetherCisco wireless lan controller 2500 - (which is already configured and working with the LAP's), I just need to get authentication working for our coporate lan. It...
I have just upgraded a client with a WLC (2504) and 3 LAPs (1141Ns) with tighter security (RADIUS and WPA2). My client has a /23 internal network; for this scenario, let's say, 192.168.30.0 and 192.168.31.0. Their old wireless was via three 520Gs a...
Hi all,Someone already do a bridge configuration with 1524 AP? I read Cisco documentation, and is not very clear regarding configuration on switch side.I will do a Bridge in trunking mode, so i want to know what is the VLAN i need to set as native vl...
Hi,Do you know where is the link to download recovery IOS for AP1130AG. I really need it. Please provide me the link to download it. Regards sir..
Hello,I wonder how can I check / what command shoul I use on non-autonomous access points to see wether they are support capwap or they support lwapp??Thank you folks..
