Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
Hi all,I am using an 877W as my DSL router and trying to use Apple TV or other Apple Bonjour services over Wireless. It is simply not working although I tried several IGMP configurations. I've seen some references to 877W issues but they were all abo...
Guys,I have 4 Cisco Aironet 1140. I open a web browser IE 8 and type their address "http://<ip address>". Then I enter my username and password in the browser and successfully login to the access point.But, There is something strange, why I only see ...
Dear support,I do have a Cisco router and Juniper firewall, which allow me to connect to internet.Internally after the firewall, i connect it to switches and wireless AP.Both switch and wireless AP must be able to talk to each other, when user pc con...
I am having a problem with APs joining a WiSM Controller.Upon installation of the controller (several months ago), i had no issues. APs joined as expected with no issues. Upon returning to add more APs i have found that APs are no longer joining. ...
Looking to add time of day restrictions to our Guest WLAN that is currently in its pilot phase.Is there a way to config time of day access to a WLAN ?Any help would be appreciated.CheersDave
Hello All,This may be just my miss-interpretation but when I configure an Autonomous 1041n AP I'm not getting the N throughput or seeing the multiple MIMO freq channels being broadcast. I get a typical 54Mg freq signature based around a channel ie.....
Hello,On advice of our supplier I've bought an Cisco Aironet 1310G, purpose was to connect 3 sheds who are about 100 meter apart from each other to the internet, a default ADSL router. It is connected with an Aironet Power injector LR2. The range of ...
Hi,I have following query in Cisco WCS 6.0.132 log file settings.• Max. file size - What is the maximum size supported by wcs?• Number of files - What is the maximum number of files can be supported by wcs?• File prefix - Purpose of file prefix ?Look...
I'm trying to add our 1st AP to the WCS. After placing the AP on the map it asks for AP details. Problem is - you can only select 1 antenna from the drop-down menu. and the air-ant513db-r or ant513d-r don't show up. it also asks for the antenna d...
Hello all, I´m new to this forum. I want to consult you because of a situation that I have.I need to install one 5508 and a 4402 together to bring redundancy to a wireless environment.Can I do this?. What are the neccesary steps to perform this?, the...
HiI'm ready configured with a controller, since only the second has the IP settings and passwords, I need to mirror these settings for WLC1 WLC2 via WCS then create a template for the next two configs are applied at the controllers. Thank you.
What is the difference between the broadcast rates that one sees on the radio interface verses the ehternet interface?This is a sh inter that I did after a clear counters 7 min before.S#sh inter | include l2|line|broadcastBVI1 is up, line protocol is...
I'm upgrading (6) WiSM 1's(12 controllers) from 7.0.98 to 7.0.116. I've completed 3 controllers total so far, and on every one of them, the AP's disassociate during the upgrade process. This happens when "Writing new APIB to flash disk"... How am ...
Hi, MSE3355 running 7.0.201.204 . NTP is configured in intial setup and synced with NTP server. but when i see the time, its offset by 6 hours. I have set the timezone correctly as per the location we are in and it still shows wrong time. Is there a...
Morning Guys,I have a situation in which I have a site where all the APs are not in the same subnet and thus the IP Addresses received by my clients are different. However, all APs are advertising the same SSID which is permitting roaming at the lowe...
