Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
GreetingsI have a question, it's possible to do a wireless wan link with 2 soho routers WRT54G?How?. Is it exist another SOHO router that can do a wireless link?
HelloI have some 871W. Is it possible to make wireless network open (no authentication, available for all) but with encryption ?I've read somewhere i could do something like this using 802.1x, but could not find any cisco documentation for that.I wan...
Hi,We had wireless LAN setup and it seems that every afternoon, the connection notification on their laptop drops to 1Mbps and slowness on the network is experienced. how can I identify the cause of this drop connection speed?Also when one of the APs...
i configured the wireless LAN controller with basic configuration in the configurtion guide but the access point 1252AG did not join the controller 2125i attached the configuration on the WLC
Hello everybody!For budget reasons, I am planning to deploy a Wireless solution over the WAN using H-REAP, my topology will be:* WLC 5508-50 in the main Site* 03 Remotes Sites : (5) AP 1141 each/site* WAN Remote: MPLS-VPN Bw:1024, RTT< 20ms (Fr...
Gday again,I am converting standalone cisco1231AP to LWAPP. In the process, the conversion is always successfull. Run the audit on WCS, refresh values from Controller and restore values from Controller... The process after that involves us running fe...
hello experts!!!we have converted non-integrated 1310 ap's to lwapp. there was no problem with it joining the wlc's with code 5.2.175.only when we tried to set the antenna power to 1 (max), we get the error message 'Error in setting TxPower Level Co...
HI I am try to setting wpa2+aes+psk with mac-filter (radius) on WLC 4402 (6.0.182), with Lap - 1142 on security , set L2 security wpa+wpa2 and check MAC filtering uncheck WPA check WPA2, AES, unckeck TKIP Auth key mgmt PSK psk fromat ASCI...
Hi,I see that auto PAC provisioning is discussed in the ACS 5.1 user guide, but I have serached the GUI, and I just can't find out how to turn auto provisioning on & off.The user guide talks about the setting being under the global settings for EAP-F...
I understand most of the reasons for deploying your voice wlan in the 5ghz range, more channels, less congestion, allows for dense deployment etc.But - does that mean I should restrict my data wlans exclusively to 2.4ghz, or can I still run my data c...
I am assuming it is too many laptops on an access point. This environment has 24 laptops on a cart used in 1 room so shouldn't the controler divy them up between the 2 antennas in the 1142 which is sitting right above them?thanksGary
Hi all, Wireless network hardware: Controller 4404, AP 1130, Notebook Dell 620, Suddenly , all apps drop , and all get re-connected again almost immediately 3 or 4 times per day .(the disconnection doesnt occurs simultaneosly in all notebooks)Do you...
I have an 1031 AP in a remote office which can't join the controller in the HQ. I'm using DNS for WLC discovery and have both the LWAPP + CAPWAP DNS entries configured. AP has static IP + DNS.Basically the AP resolves the DNS name then connects to th...
OK, I need to actually make my unsecured wireless network secure. Where do I even begin? What I would love to happen is that it is invisible to the user but with about 1000 laptops we don't have time to do mac addresses etc. I have heard that what is...
I tried to login into a 4402 WLC through the console but it is not responding to input through the console.after asking for the USER, it will not take any input from the keyboard
