Wireless

I have a SIP trunk between the CUCM and the Mitel that isn't quite functional.  From the Cisco I can talk and the Mitel side will hear me but I can't hear anything from the Mitel side.  I have trunking information setup on both side pointing to each ...

I have been asked to configure the following: 1. Create a specific SSID with 802.1x Authentication (Done)2. Create access lists, to only allow users connected to that specific ssid access only to CITRX, is this possible?We are attempting to connect i...

Hello,We have a customer with ~15 x AIR-AP1231G-A-K9 that they would like to replace with N capable devices in a warehouse.  The warehouse has ~30 ft ceiling and is ~300' x ~200'.  It's got around twenty 20' tall x 100' long metal shelves with cardbo...

I am setting up my Cisco 877w Router with wireless and have read somewhere that the DHCP service cannot be activated on a Wireless interface.  My config is running, which is working so far as I can connect my Windows 7 machine to the SSID and hit tra...

Any assistance would be great.Received a Cisco Wireless 5508 Wireless Controller and 8 each Finisar FCLF8521P2BTL SPF 1G Transceiver from the ordering department.When configuring the controller the following error comes up for all of the transceivers...

We are testing Ipads with a select number of users in our enterprise network. The only complaint by two of our users so far is that they are unable to surf the web even after getting authenticated to our c1200 series stand alone AP running IOS 12.3(8...

I have an existing VOIP provider (Ringcentral) they said the SIP 310 would work with thier service. I do not see where I can put in the settings they have provided me. I have looked through the phone settings and logged into the web interface. I have...

Hi Guys,Wondering if anyone has come across this issue, i'm trying to download the base license for the WLC on ISM300 following this guide:http://www.cisco.com/en/US/partner/docs/wireless/controller/controller_modules/sre/configuration/guide/wlcsrecf...

I have a Cisco 7925G phone, LAP1142N access points and a 5508 with version 6.0.182 WLC. The phone will not join the network, nor do I see any errors in the Log of the WLC. The phone is set to AKM and the keys match on the WLC and the phone. How do I ...

Is there a guide on how to configure the AP541 for a Guest SSID wich would be isolated from the corporate LAN.Thanks in advance.

I recently upgraded to a cisco linksys e2000 router.  Is it possible to use my old WRT54G router as an extender?