Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
Hi all,I am facing the ping drop and general failure error when I am connected to AP and try to do ping any IP with the ping size is 5500 bytes.Print screen shot is attached for your reference.Product/Model Number : AIR-AP1242AG-A-K9 ...
Hello I have Cisco wireless router 800 series the wireless module work such as must if I files of pc1 to pc2 do not send then become the wireless module reboot each time if I want files or move which can me help please copy
Hi,We have Cisco 5508 controller and 1130 LAPs (in h-reap mode). We are deploying wireless VoIP phones in the network and the question is,do I have to configure the following line on the switchports the APs are connected to?switchport trunk encapsula...
I can not get the newest version loaded on my Windows 7 machine. Anybody had any luck with this.Thanks
dear all, see the attached diagram, i am facing small problem.I have 4 1140 Access point, configure windows IAS and local radius authentication and i am facing problem that client not getting ip address from dhcp server. When i was connect...
We have mesh network with WLC 4402 (4.2.207.0) and LAP1510AG-A-K9Now we want to add more Cisco AP's to our network as a RAP or MAPI want to know 1522 AP can compatible to 1510 with below details? Cisco Aironet 1510 MAPCisco Aironet 1522 MAPCisco Airo...
Does anyone have any 1252 autonomous configuration examples they would like to share? I want to spend some time in the lab and convert some LWAPP 1252 to autonomous and play around with the 802.11n configurations. I have configured hundreds of 1230...
I created a new WLAN on my 5508's a few weeks ago. I finally attached some clients to this WLAN and when I roam from LAP to LAP I completely drop, and wireless card disconnects for ~60 seconds.The WLAN is built with WPA2 - PSK - TKIP. I thought this ...
We have problem with assigment IP from dhcp the topology it thisWLC ---> FWmodule dhcp server, ias serverin WLC we have 3 logicals interfaces and 1 Management:My question is, what is the interface that must allow the passage of the ports 63 and 64 i...
hi, recently i have deployed wlc 5508 with ap 1262. initially i had trouble with the existing version on the wlc (6..0.199.0) which AIR-LAP1262N-E-K9 was not registering with wlc. i have upgraded the wlc to 6.0.199.4 ver still it was not registering....
Hi Fellows,I wanna know if 5508 Cisco WLC support LACP or not. Actually i work in a project where i mustconnect WLC 5508 in Enterasys Switches with Link Aggregation.Enterasys Switches support LACP 802.3ad but when i learn Cisco Books i see that WLC 5...
Hi Guys,We are running 2 Cisco wireless controllers here..I believe a 4400 and a 5500..All our WAPS and Clients are going to the one Individual Controller..Is it possible to load balance all waps/clients between these?ThanksJames
Hello,I 've two questions for the h-REAP mode on a WLC2100 (7.0.98.0) with 1242 Cisco :first: what the maximun number of clients can connect on a H-REAP LAP ?second: I've configured one WLC with 4 LAP Cisco 1242 in H-Reap mode: the power level of 4 L...
Hi All,I'm looking at a design where I would have a few remote sites and a centralized WLC. My requirement would be to have a common SSID advertised across the remote sites and have that SSID locally switch; so to note tunnel all the traffic across ...
Hello Everybody,we have a WIP310 and some trouble with this Phone using WLAN and SIP-Server, so i need help and hope find some kind here.The Phone is connected to a WPA2 protected Network an authenticated without problems and the SIP is also register...
