Wireless

My wireless controller 4402 is running with 802.11a/n and 802.11b/g/n.  How do I disable 802.11a, 802.11b, 802.11n and keep the 802.11g?Thanks.

New commands were added to 6500 IOS SXF6 to ease initial setup of the trunk and channel ports for the wism. Problem is after typing these commands I can't undo them. This is the "wism module <mod> controller 1 native-vlan" command.After removing thes...

We are currently having an issue with clients that connect wireless and go to the web.  Our WiFi adapters on XP choose 1500 mtu by default.  when being tunneled it causes the packets to fragment and the pages to take forever to load.  At 1300 mtu, ev...

Hello,I have WCS running at the version 6.0.132; would like to upgrade to latest version 6 available; downloaded software and started installation. At the point where installation should find the previous version, the messages says that there is none...

I have two WLC's 5508 running on SW 6.0.196.0. They are member of the same mobilitygroup and they have distributed the 60 AP's among them self. I have created a lobby admin user on one of the controller The question is; when this Lobbyadmin is creati...

Hi, I Use WCS 5.0.56 with 2 controller Wism and about 30 AP (AP 1130g). This morning I want to reboot some AP so I make a template and check the box for Reboot AP after update, I check about 10 AP and clic Apply button but it's stay at 0% of apply re...

Hi,Could someone please point me in the right direction as to which Access Points / Bridge I need to connect one central building to five other buildings. With the potential to send the wireless across a Loch 1.2 miles away to give internet in a furt...

Dear Team,I have a problem with LWAP. i have 2 wireless stand's  802.11a and 802.11b/g configured in WLC. one of the lwap which is registered with controller appers in yellow in 802.11g, if i click all lwaps monitering mode but it looks green in 802....

Hi!My firewall admin was asking me why UDP port 12223 and UDP port 5246 to broadcast (255.255.255.255) keep showing up as top blocked ports from my AP VLAN, I have not figured this out myself, maybe someone here knows?I have the following setup1142AP...

Hello,I've got some troubles with the WLC 4402 for some days. I have a Lab with the Management VLAN 10 in the range of 192.168.1.128/27. The WLC Management interface has the 192.168.1.137 and the AP Manager has the .138, I have two VLANs with two SSI...

In an indoor environment, access points are usually installed outside the ceiling tiles facing downwards to the users.Does it make a different if the access points are installed inside the ceiling tiles facing upwards? Take the indoor 1130/1140 acces...