Wireless

Currently using WLC 4402 with about a dozen WAPs. I would like to start logging some messages to troubleshoot some association issues. The syslog does not seem adequate for this the issues I am having. I noticed the default SNMP traps but is only ...

Hello,On the controller, when you look at an access points config. There is the syslog server for the access point with the default ip address of 255.255.255.255. I was wondering if there was any way to disable the syslog server for the access points...

Hello,We are using a WLC4400 with sizteen 1510 APs. These APs run off of Alpha's battery backup. According to Alpha, they provide Cisco with the status of the battery backup, percent runtime remaining, etc.However, I am having problems obtaining th...

I recently recevied an AP impersonation alarm. The culprit seems to be a Netgear AP outside of the walls of our office space. I am in our corporate office several states away and we have no IT staff that is local to the location that this is occuring...

We upgraded 3750 switches from 12.2(35) to 12.2(46)SE.It now won't accept the option 60 command when the switches boot up.The error message looks like this:option 60 ascii "Cisco AP c1130" ^% Invalid input detected at '^' m...

My configuration is 4404 WLCs with WCS. We have a guest WLAN configured and the users authenticate using Web Auth and local accounts created by a Lobby Ambassador. My question is if there is a log somewhere that records when users logon and logoff ...

I am running 1242 AG radios and wish to only allow G access. I have disabled the A radio on these AP but they still appear in the WCS monitor listing. I wish to remove these from appearing on that list (this is more or less an anal retentive kinda ...

I have WPA configured on my APs, but I'm interested in going to WPA2. What do I need to change under the SSID? I don't use the web interface, so CLI commands would be best.Thanks!John

I am confused. If I have a WAP at home and I want to get internet access from two laptops... will there be interference (or collitions) if both try to download something at the same time?. I think yes because both would use the same channel to commun...

We have three wisms and I used to upgrade from each wism CLI one by one. This time I want to try to use WCS to upgrade all of them at once. Are there anything to consider when using WCS to upgrade a bunch of wisms? Is it going very well?Thank you!

Hello, we have one WLC 4402 and I would like to have another for redudance.Does anyone have tips regarding the configuration ? RegardsJF

AP 1130 (Autonomous) is converted in to LWAP and it has go the recovery image of “c1130-rcvk9w8-tar.123-7JX” We tried to associate with WLC in L3 mode by enabling DHCL option 43, LAP is initially getting associated with WLC and downloading the la...

Hi, I have a Cisco 1200 Series AP and I want to apply security for my users when using wireless. I have also got ACS. Can anybody help me out on this. Thanks in advance.Best Regards,Rahim Amir Ali

Hi I looked for a specific config example for this, but didnt see one. I'm thinking of setting up EAP-FAST on my autonomous APs and using the internal RADIUS server on the AP. Is that going to work? Or is it just for LEAP and MAC auth?