Wireless

We recently changed our T1s over to another vendor and, as a result, had to get new external IPs. I have this Aironet 1200 WAP that is using the old external IP address. I need to know how to change it. Unfortunately, the person that set it up no lon...

All,I have three SSIDs/WLANs and 100APs. Now, one of the WLANs is a guest-WLAN which should only bee seen on 16 out of 100APs.If I enable the guest WLAN globally then I would need to apply the WLAN override template to all APs and then I would need t...

hello,perhaps somebody can help me with these error messages i receive from the wlc:Oct 26 09:07:21.073 apf_wme_utils.c:2640 APF-4-RCV_ACTION_FRM_WITH_CODE: Received Action frame with code 2 from mobile station 00:1D:A2:30:E7:4DOct 26 00:06:57.271 ap...

Can you disable the ssid from broadcasting on a 3750, and if so where on the menu?

Using a 4400 Wireless Controller and WCS how do you upgrade the LWAPP IOS on Access Points to the latest version or is this even necessary? My LWAPP access points are fully functional 1131's and converted 1230's, but I would like to know what the pro...

Hello,How do i transfer an image file from an Aironet 1100 and place it onto another Aironet 1100.I'm not refering to the configuration, but the entire boot image.Is there a way I can do this?Thanks in advance.

Hi, we have the following implementation: Cisco Access Points mainly 1200 series and 1130, Cisco ACS v.4.1, and MS Active Directory. I've used a self generated Certificate on the Cisco ACS, and installed it on the local PC, also linked Cisco ACS with...

I have configured the wlc for mgmnt auth using tacacs+ but the wlc is checking the local db first. I have changed the priority order from radius to tacacs but my tacacs id,which works for other devices, does not work on the 4400. Question: Is there a...

Recently, we had a vendor come into our organization to implement a new wireless cart for nurses and they recommended we change our wireless config in the building that these carts are going in, due to their wireless carts not working properly. Up un...

I've couple of them working well, but i want connect to a couple of switches in both sides, how i can do?

Customer has four AP1242 autonomous access points running 12.3(11)JA4, downgraded from 12.4.10b JA and the 7921 phones will periodically re-register with the CCM 4.3 server. One phone will not get a DHCP address but will work if we statically address...

Hi, I issued the 'sho dot11 assoc' command on my 1100. This 1100 is configured for a single SSID of AirYork. The results (shown below) show the associations to the AirYork SSID but it also shows other MACs that are 'not related to any ssid'. I've tri...

I just installed our first Mesh with 16 1500's, 7 are wired, (4 provide the A backhaul 3 for coverage only)9 are wireless. I would like the Bridge link to be "auto rf" and the coverage (G) to be manual or custom.All came up but on some of the A radio...

Greetings.My AP1240AG runs 12.3.11-JA4 code, works fine, but I can't enable https on it, SSH is working fine. I need both https and SSH both.I've tried the same config on my 1231BG units, and that works perfectly with the same config.Anyone heard of ...