Wireless

My problem is that I keep running out of IP addresses on my wireless subnet. I would like to create a contguos subnet with the theory that this would create a seamless roaming enviroment. In one of my other buildings I have two seperate subnets confi...

In a wireless environment, what is the maximum ping packet size I can use together with multiple section of ping command. For example: I used multiple section of the following command. Ping 10.10.10.10 –t –l 10000 I also try multiple section of ping ...

I understand their is a 1100 Aironet setting that will adjust some AP timing values if I want a 802.11b client just over 1 mile? Maybe beacon or RTS? The timing was related to the 1 mile AP to client specification in 802.11b.

The Dell wireless adapter can associate with the AP1231G, but as a repeater and not as a client. Also the machine can't get an IP. I use other vender like Intel with no problem. The built-in wireless card of Dell laptop also works. IOS is 12.2(15)JA....

When I edit a template I have created I get an error processing configuration / no valid device versions supported.What does this mean?

hellocan i manage many remote wireless LAN using CWWLSE-1130-19-K9?

Can More Than One Repeater Associate to a single Base Unit?

We have a campus with a handful of buildings that have limited wifi coverage - quite a few spots in various buildings where laptops lose connectivity. I'm looking to employ some wireless voip so need to get rid of these blackspots. I'd like to make u...

Hi for all !I'm working on IBNS , i had configured IBNS on wired lan with Catalyst 2950 , ACS 3.3 using a PEAP authentication method. It work correctly with dynamic vlan assign . . . .Now I trying to do it in WLAN, i use aironet 1100Can I re-use PEAP...

I want this..Configure 2 SSID in a AP1100. One for TKIP+WPA+IAS RADIUS Active directory Authentication(this is working fine). 2nd one for Local Mac list authentication only with out any encryption..Is this possible..?

I have a 1310 bridge Unit A that is associated to unit B. I can pull up unit A from the web interface and see unit B in the associations page. Is there any way to configure unit B from the unit A side without directly connection to it?

Hello,I would like to use a 1300 Bridge in AP mode. I didn't found in web administration interface any menu about local radius server like you can found in AP1100 menu.Does that mean this 1300 Bridge haven't local radius server possibilities ?Thanks ...

Does anyone know which types of traffic I encrypt when use static WEP key (64 or 128): unicast, broadcast or both of them?Thanks for cooperation,Jovan.

HiUpgraded 25 AP1230s from 12.2(15)JA to 12.3(2)JA five days ago. All APs are configured with same vlans ssids etc. Currently we have 4 ssids and vlans with differnt grades of security.Vlan 3 use Wep, PEAP and Mac authentication/encryption.Vlan 15 an...