Wireless

Does anyone know if I can take the PCMCIA Card out of a PCI Wireless adapter and use it in a laptop. I tried it and can get associated but Wireless card still says unavailable.

Need to configure radius authentication. Already tested with Cisco clients and all works OK. Iam using Cisco Secure ACS, AP1200 but final solution must work with Centrino and MAC. Clients should authenticate with Radius using same username and passwo...

I would like to monitor BBSM server up to the user session after being authenticated. Is there any mib files on BBSM which I can poll?If not possible to do, anyway to export out the user session/connection report?regards, Sam

Hi, we used a wireless router in my working place to connect laptops to the printer server. The laptop's IP was assigned by DHCP through the router. The printer server had a static IP in the wired network that the wireless router connected in. Howeve...

I currently have shh available to the outside interface of my PIX 501(using dhcp from cable provider). Now is it possile to also redirect ssh to an internal host using the "static" command? Can these two commands work together? thanks

Hello I recently upgraded my VxWorks 1200AP to IOS version 12.2(11)JA1. I have downloaded and unzipped the latest version 12.2(13)JA1. When I go to http update it locates the file on my desktop but comes back with an error: Upgrade error: File not fo...

Does any one know if the Cisco aironet 350 can bridge ethernet using its console port.?

Hi,Can anyone show me the pointers were i can get more information on differences between the bridge types ( RB, NRB, WGB) and where (in which scenario) exactly each one should fit inThanks in advanceArun

I have 16 bridges located in a 28 sq mile area. 4 of them are set up as repeaters. Some of the 16 are constantly being re-associated and authorized and roamed. Does this affect performance? Can I force any one of them to use a particular bridge as a ...

Which products does Cisco offers for Indoor WLANs for the different 802.11 standards (a/b/g)?What is the highest level of security available at this point, and will this products be upgradeable to 802.11i when it is ready?

Has anyone had any experience with a WLAN and Nextel phones. We currently have a large deployment of Nextel phones in our organization and I was wondering if anyone has come up against this challege during a site survey. I am pretty sure the Nextels ...

I currenly own Xircom cwe1130na. From what I understand, the card is a repackaged Cicso aironet 340 pcmcia card. Intel has stopped supporting these cards, a well as ant driver/firmware development. That said, my question is simply this. Can the Xirco...

I have 3 1100 APs that time out in the middle of upgrading IOS, and the firmware that's on there now does not fully function. I'm able to telnet in issue commands to the AP, but that's about it. I cracked one open and noticed that there is a 4pin con...

I have 2 sites that use point-to-point 350 bridges. I have the non-root bridge setup to use leap, MIC and TKIP. The bridges work fine most of the time. but periodically they stop passing traffic and I cannot ping or web to the non-root bridge. When I...