Wireless

These are the setup that I have: BBSM---Switch----AP----Wireless ClientAfter wireless client authenticated, if I let it idle without any activity ( meaning not accessing any web site/application), How long will it timeout the connection or it will ne...

I have read a paper that indicates NDIS 5 support is mandatory for adaptors that will be used for Hot Spot access. I don't believe the PCM352 has this - but appears to work in UK HotSpots I have evaluated.Latest wizard, 1.1, says it is installing NDI...

I am having trouble hardcoding ip address, works fine when leaving as dhcp, when i hardcode the bvi1 interface I wont be able to access it any more. I've tried this via web and command line. I need to know what i am missing.

Hi all,I have installed AP 1200 with ACS ans LEAP. I configure a user with only 1 login allowed.I could not connect anymore to the network and I am sure that no one is using this account ( it's a lab).The reason of the authentication failed in the AC...

Hi.My problem deals with AP 1100 last sw release and 7920 last sw release. I know about 7/8 concurrent calls for one AP but I have problem keeping associated more than 12 7920 at the same time. The messages I get from the CLI:Mar 3 17:14:51.214: %DOT...

Is it possible to punch a hole in the interclient comms blocking? Basically, we have two AP1220's attached to a switch which attaches to a border router, which performs the traffic shaping. Some clients however want to be able to play games with each...

I have problem with my BR350, why sometimes my BR350 lost signal carrier.ThanksThomas

HiI have the following situationRoot BR ------- 8km ---- WGB -----------9km-------- non root bridgeThe P2P link works fine. when i turn on the wgb and i ping the wgb i have many packet lost. and when i ping the root br from my Backbone i have also pa...

HiI have the Problem that i get on 2 Non root Bridges the following error message: Network Bridge Loop: Received packet from Self destined to [rootbr]macaddressofrootbridge on port "br9"I have one root bridge and 2 non root br. the two non root br se...

We have a discussion on how to define coverage when requesting a complete WLAN installation from a supplier.Terms such as "good coverage" ... don't really fit into a spec.Anyone care to share views on how to define coverage, such as "a signalstrength...

Hi I need to setup a wireless hotspot in a cafe.Cafe will have a DSL connection already.What do I need to do ?ThanksGeorge.

I have a copule of floors with a total gross ares of 727870.How many AIR-AP 1200 are reuired if all are wall mounted.Please neglect all other parameters such as interference.thanks

Currently have 14 Aironet 350 AP's. 3rd party vendor using Symbol 2800 series handhelds states we must add addtional coverage to be able to use the handhelds. Will require and addtional 25 AP's. I would like to go ahead and upgrade to the Aironet 120...

Over a month ago, I attended a seminar at my local Cisco shop on the new 7920 wireless IP phone. CCO still does not have any docs posted for this product. What's up?