Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

review


Labels

Forum Posts

Interface Dot11Radio0, Deauthenticating Station 000b.fdd6.1108 Reason: Previous authentication no longer valid I have an enduser that keeps dropping connection. I see in the logs of the 1120 AP the statement listed above. I have many other users off ...

j-mason by • Community Member
  • 587 Views
  • 1 replies
  • 0 Helpful votes

Could you tell me if the last WLSE image version 2.0 is compatible with the Hardware WLSE appliance 1105 ?If yes, how can I update my WLSE 1105 from version 1.3.2 to version 2.0 ? The procedure explained in the WLSE 2.0 Installation guide explains ho...

zadmin by • Community Member
  • 701 Views
  • 1 replies
  • 0 Helpful votes

Does anyone know what type of cellular (GPRS or CDMA2000) devices are available to connect to the serial interfaces on a 3200? In understand they will be non-Cisco.Also, has anyone partnered with a total solution vendor on a 3200 Mobile Access Router...

eheston by • Community Member
  • 1005 Views
  • 2 replies
  • 0 Helpful votes

Hi,I have some problem about VPN solution :1. is there any VPN client software for WIN CE that can use with VPN3000 concentrator?2. can I setup ip filter per user or group at ACS and use for VPN3000 remote access VPN user?Best Regards,Jackson Ku

We are having a very difficult time addressing a voice quality issue with the 7920 wireless phones. When there is no traffic on the ap to which the phone is connected other than the traffic produced as a result of the phone being connected to the ap,...

mzeman by • Community Member
  • 700 Views
  • 1 replies
  • 0 Helpful votes

I have noticed that several times a day users loose their connection and upon review of workstations with 350 wireless adapters they loose their IP address even though they are still associated with AP. Re-authenticating did not seem to help, but abo...

mallenson by • Frequent Visitor
  • 1385 Views
  • 4 replies
  • 0 Helpful votes

I have point-to-point wireless link with AP350 and WGB350. The distance is 2 kilometers. One place have 3-5 PCs and the other place have one Server. They share SQL Application. The problem is: after 3-5 hours the connection is lost. In this situation...

jmanevski by • Community Member
  • 1024 Views
  • 3 replies
  • 0 Helpful votes

HallooooI have already install cisco 350 bridge (use channel 2)and working properly a couple last days, but when I install senao (cordless telephone) working at 268 MHz for tranmitter and 394MHz for receiver then the problem start, like througput of ...

Hi,i try to define a mac-address filter for only 2 addresses (rest should be disallow)on an cisco 340 AccessPoint (sw: 12.03T).New MAC Address Filter: -> Dest MAC Address: -> Add -> ApplyNow the allowed address is on the "Existing MAC Address Filters...

rechberger by • Community Member
  • 901 Views
  • 1 replies
  • 0 Helpful votes

I have a WLSE 2.0.2,When I try to import a template from an AP1200 IOS 12.2(11)JA1, it fails with a "Login failed. Wrong credentials" error.Monitoring the TCP connections at the access point, I see that the WLSE tries only a telnet connection that fa...

fds by • Community Member
  • 864 Views
  • 2 replies
  • 0 Helpful votes

1. What is involved with an upgrade from 802.11b to 802.11g? Is this simply an IOS upgrade? The client would like 802.11g, but isn’t sure if they can simply upgrade, or if they should wait til 802.11g comes out.2. Would it be possible to segregate se...

fpineda by • Level 1
  • 705 Views
  • 3 replies
  • 0 Helpful votes

At my school we are looking at relocating a computer lab (approximately 30 desktops) to a new room. Would it be wise (based on throughput) to make the new lab wireless or to have the room cabled? We are running both ipx and ip protocols on a novell n...

b.calsing by • Community Member
  • 994 Views
  • 2 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card