Wireless

I am interested in either the Aironet 340 or 350. The only difference I can seem to find is the 350 is a higher powered AP. Is this the only major difference?I am interested in a SOHO setup and my office is in a converted garage. I need to share the ...

Has anybody managed the Aironet 350 APs using CiscoWorks 2000? If so, what can you tell me. I have doubts about if you can do more things using CW2000 than if you are using HP OV. Of course if you want to manage CISCO switches the CW2000 gives you mu...

When using LEAP and Cisco ACS, is the client's password stored as a hash in the Cisco ACS RADIUS server or stored in the server in a RADIUS format? The reason I ask is that we are trying to understand if mutual authentication between client and RADIU...

Have a 340BS with encryption. Unable to obtain an address from MS DNS server through BS. wWhen I disable encryption, address is obtained. Any suggestions.

I'm using an AP350 device and LEAP. Throughout the day, about every 10 minutes, I get the following error in the access point. During this time, I can't access the LAN unless I stop and re-start LEAP on my client but I can ping the AP device from the...

Is Leap supported on a point to point bridge connection within the 350?

Can anyone point me to a link that talks about how to setup roaming with AP350's. Right now the clients has to drop completely before connecting to the AP that's nearest to it. From what I've seen on some of these boards it has to do with changing th...

If anyone can help with this it would be great. I have a 350 AP w/ 11.10 firmware running LEAP, i have a couple 350 workgroup bridges that authenticate with it just fine, but i have a win98 client w/ a 350 pci card in it that will not authenticate. t...

We have upgraded the IOS on Cisco 2924 switch, configured it for Tacacs, however the visual switch management using Netscape for the above switch doesn't work. Any ideas?

Has anyone ever had a workgroup associate to itself?i have about 50 workgroups in my network, but of one access point(350 11.07) my workgroups show up as associating to themselves? Any ideas??

my routers are managed by HP NNM 6.0 i have ios 12.1.1 in almost all my routers, i was asked by my management-system sofware provider, what version of snmp my routers support and how cisco use de SMI rules to allow a managment system to communicated ...

hi all,is there is any one who knows about the security issue if u have the cisco 350 AP andother vendors PC cards, i mean to say what kind of security that we can achive from this mix setup.will this setup provide the EAP, MIC, KEY ROTATION or DYNAM...

Looking for api call libraries for the AIR-pc352 and AIR-ln352 radio cards to access from application running in ce. We would like to be able to write the api calls in the application to change the ssid, sleep mode, enable/disable card, etc.

With the release of firmware 11.10T, Cisco has made a number of security enhancements to its APs. I've read the SCG, and understand what it is that these enhancements are doing.But in actuality, what is the net effect of implementing these new featur...

Greetings,I am at a site using wireless IP phones. I need to have 2 APs in 1 location. I have tried to set 2 APs with different channels but same signal strength. This did not work well cause when the wireless phone comes into an area where the signa...