When I power on the AIR-AP1562I-E-K9 AP, it lights red for the first 5 seconds, then flashes green for 1 minute, then flashes red, yellow and green once, then no light for 1 second, and at the end, the red light is constantly flashing, what could be ...
Hi Guys,Currently I am assessing a wireless network for a branch office. The office is new and will use L3 connectivity for traffic towards HO. During the assessment, I found that FlexConnect might be the solution for branch office wireless connectiv...
Hello,Does anyone have a reference link for the supported number of APs and clients for embedded wireless controller on C9300 switches with firmware version 17.6.4? I can only find for Embedded Wireless Controller for an AP or its the same as when it...
Hi All, I have been trying to configure a guest network for my Cisco Catalyst 9800-L Wireless Controller for some days now. For the guest network, i want it to use an internal dhcp on the controller. I have been trying for days now, however, when a ...
I configure Access Point C1131 in autonomous mode, I create free SSID for everyone to connect.Can I see a list of devices connected to my Access Point on the GUI?
kindly i need support for how to create self registration page and how it make it customzied i need to do all of this in WLC 9800 without using ISE
Our company is having a conference at a hotel and I've been asked to see if there is an easy way to extend and broadcast our companies WiFi in the conference room at the hotel. I've heard of that, but have never set it up or anything. Anyone ever do ...
1) Firmware on WLCs has been upgraded to C9800-40-universalk9_wlc.17.03.07.SPA, then several days ago there was WAN instability on a remote site , afterwards flexconnect access points on such remote site were able to join new WLC despite wrong WLC na...
We have exciting Cisco AIR-AP3802I-E-K9 access point and we have ordered 9115-AXi embedded access point and we wanted confirm if acess point can be managed by embedded controller
My company has been plagued by an issue that we can’t seem to get to the bottom of. Users connecting to our wireless network are getting “can’t connect to this network”. We have a 5508 as the wlc and ISE as our radius servers. My laptop would intermi...
Estoy tratando de configurar un AP 9120 AXE, pero no estoy segura si es necesario una controladora para este modelo, ya le he cargado la imagen y EWC, pero sigo sin poder habilitar las ssid o que me aparezca la red wifi por defecto
my customer has 1800 access points joined to a 3850 express mobility switch ( switch acting as wireless controller ) , now i will need to migrate to central 9800 controller cluster , but because of slow wan link, the ap can join the 9800 controller b...
Hi everybodyAPs appear as not Joined after deleting the controller hostname. I also removed crypto with the CLi command "no crypto pki trustpoint C9800_WLC_TP."I then recreated the certificate with " C9800_1E #wireless config vwlc-ssc key-size 2048 s...
Cisco 5520 in HA running 8.10.151 with (150) 2082i access points. Local mode, local controller, central switching. WPA2 AES PSK. Fast Roaming OTA. 802.11v/k enabled. Session timeout 28800. 5Ghz only, 20Mhz channels all UNII1/2/2e/3 enabled. No DFS is...
Hi All,Thanks in advance for hopping in and reading this and for any advice you can provide!My scenario is extremely frustrating for me. I am running a virtualized C9800-CL (17.11.1) locally hosted on a Supermicro SYS-110D-8C-FRAN8TP, 8 CPU cores, 16...
