Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
HiI'm looking for some advice on what is currently in place at your sites regarding keeping the SSID count to a minimum. We have Cat9800's and ISE but various types of SSID to cater for many different needs and end device capabilities. What types o...
Hi allwe recently got some cisco hardware from a company who closed down shop here in nigeria.one of the device i the cisco air-ap3072i access point.i found out i can only set it up via a hardware controller.the firm we got them from did not supply a...
Good Day, Could Cisco Catalyst 9115 series join Cisco Mobility Express? We have already used Cisco Mobility Express and Cisco AIR-AP1832I-S-K9C in our environment, and also want to buy the new one but those are end of the sale. The replacement mo...
Hello guys I have a new outdoor access point there don't wanna join the WLC. We think we need to upgrade our WLC with a new firmware its have the version 17.4.1? I think this is the message there can tell us something, its from the AP when we try t...
Hello I am hoping I can get someone to give me advice on what model antenna or antennas to use for this application Cisco 1532E AP I cannot mount it in plain site and need to put in an area where I can use extended cables for the antenna. What m...
Hello Experts, I would like to ask for advice on choosing new wireless controller to upgrade our existing old WLC 5508s:Option 1: Embedded Wireless Controller on Catalyst 9130AX Option 2: Catalyst 9800-L We are a small org with just 100 APs. Half of ...
Gudday allAbout 2.5 years ago (just before my time) my company changed from Cisco APs and went to Meraki.Due to the nature of our work it has become necessary to set up a couple of mobile (travelling around SE Australia) truck based APs for remote ac...
Do Wi-Fi 6/E Catalyst APs support UNII-4 channels (channel 169-171)?
Hi Experts , We have a cluster of WLC 9800-CL , We are planning to upgrade to 17.3.4c.Could you please share me the good document on upgrade and also suggest the pre and post check which I have to do during the upgrade activity .
Hi everybody! For one of my clients I need to Upgrade the software image of a vWLC from the release 8.0.115.0 to 8.5.182.0. I wanted to know if I have to make some Intermediate upgrades or if it is direct. Also, if I have to make intermediate upgrade...
how to enable DLS mode in cisco 5520 (FR-21636wl-04) >show mobility summary Mobility Protocol Port........................... 16666Default Mobility Domain.......................... FR-21636wlMulticast Mode .................................. Dis...
I'm investigating an issue with a newish installation: 9130APs in RTLS-density deployment running on an HA pair of 9300 controllers.17.3.5a software. The 5GHz looks fine, but on performing an Ekahau survey it became apparent that the 2.5GHz was not. ...
Dear Experts, We have a RAP and MAP connection using Cisco 3702E model and manged by 5508 WLC Now requirement is to connect a 8 port switch 3560X to the MAP Cisco 3702 AP for extending connecitivty to security cabin where a wired IP phone and one ...
I checked the rogue detect log as above.I need to figure out what this log is.The log says "seen on LAN".Does this mean that the client broadcasting the SSID is trying to make a wired connection to the LAN?
Hello,My problem is i cant get in to the webui of the AP. I connected the power injector with the switch and the AP. I had a previous AP C9120AXE-T and the led shined green and configurated it already. i try it with C9120AXE-E but it doesnt shine gre...
