Hi Guys,I'm having some trouble getting the WLAN poller script up and running.And I would like to have it up and running in cause of the flash corrupt issue while upgrading the WLAN Controller. I tried using different versions of Python (and of cours...
Forum Posts
I am having problems connecting via SSH to a 9800-CL in my lab environment.There are NO firewalls between devices!Configuration on WLC is as follows... hostname WLC001!aaa new-model!aaa authentication login default localaaa authorization exec default...
Let me know the differences between WiFi regulatory domain for SMB and Enterprise products.
Does anyone know how to implement this feature on the C9800 ?Need this for a PWLAN service where I have to source the radius request from the same interface as the clients are in...At the moment the only way I see is to create this SSID for every int...
Hi All,Setup:2 x 5520 (SSO) 8.10.121 = Foreign WLC (using 9100 series AP's)2 x 3505 (HA) 8.10.121= Anchor WLCSolution Requirement- Guest WLAN anchored to 3505's in DMZ (Over WAN link).Firewall rules are correct, mobility tunnel up (EoIP) and tested w...
I have a used Cisco 5508 wireless controller. How do I see what boot image the controller is running on the graphical interface? I was on the page but I'm so new to this, I can't find the page again.Thank you.
It´s a new Deployment with 9800-CL and ISE 2.6 with 3 Guest Portals.If Windows and Android connect to a open SSID they will get a Push Notification to Login, but certain Apple Device won´t get a Push Notification and it´s not working.I captured the t...
Hi AllI have been doing some packet captures on my Meraki APs, I have 2 questions 1- Why do I see beacons on the 2.4Ghz range with channels other than 1,6,11, I see beacons on channel 10 etc, why is this?2 - Does the AP send the same amount of beacon...
Dear All, Wish you all happy new year ! I have a situation to change the AP High availability : One of my WLC is decommissioned and replaced with other name and IP address. I need to replace the secondary WLC name and IP in all Access Point. Is there...
Hello and sorry for my bad english I have mutiples cisco controlers and 2 virtual controlers in ESXI with firmware : 8.3.150.0All my new AP don't want to join one of the 2 virtual controler. On the second one everthing is fine! I don't understand be...
Hello Team, We have a business requirement in capturing the Number of users connected per Wireless Access point. Currently all our wireless AP's are LWAP associated with Cisco WLC 5508. When we are doing the SNMP walk to WLC we were able to capture t...
Hi, An Intel AX200 Windows 10 client is associated to C9120AXP AP with Embedded WLC. With 40MHz channel width on 5GHz band, I could get iperf Wifi to LAN throughput from 300-350Mbps. Wifi client 'current TxRateSet' shown 13.5 (sometimes 13.0), not m1...
Hi All, Need your help to resolved cisco mobility tunnels issue, We checked with our firewall team they said ports number 16,666-16,667 including UDP 97 are open. But still after sometime means sometime 1 days sometime after few hours mobility tunnel...
If you run a system backup in the active copy is it also placed in the standby copy also. If so where would it be defaultRepo has no backup in standby server
Hello friend new here .I need your help,One customer has a wlc 4400 with aircap 3502I. The problem is known for expired certificate and it needs firmware upgrade so I contacted Cisco but they said that the product is end of support, and I’m thinking ...
