XR OS and Platforms

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Take

 

Forum Posts

Hi, I'm working on upgrading ASR from 5.3.3 to 6.3.3. I've tested this upgrade in the lab and it was very straight forward upgrade. However in production i'm getting some errors.I did install add with the tar file that went ok and now the activation ...

mrkasuj by Level 1
  • 2104 Views
  • 5 replies
  • 0 Helpful votes

This 9001 router is stuck in boot loop and I have yet to figure this out.  Ive tried 6.1.4 vm file and 4.3.4 vm file load from rommon boot using tftp but neither works.  I get the below errors when I get vm loaded from rommon.  The install completes ...

glenthms by Level 1
  • 1065 Views
  • 0 replies
  • 0 Helpful votes

Curious if anyone might have some insight on a BGP session setup problem I'm seeing. I'm having trouble bringing up a BGP peering session between IOS-XR VRF  and  IOS.[ IOSXR_PeerA (VRF)-----IOSXR(Global) ]---(internal network, 3 hops)---IOS_PeerB Pe...

Hi allI want to know the detailed behavior for each item.We have suffered a number of major service down due to a fabric loopback test failure. RP/0/RSP0/CPU0:IBR-01(admin)#show diagnostic content location 0/rSP0/CPU0Thu Feb 6 08:48:28.963 UTCRP 0/RS...

Hello all, I want to install a new IOS on ASR 9001. I try to install it as below but it's not working. Currently it's running 6.5.3 with the below packages . Anyone can help please ? Active Packages:disk0:asr9k-mini-px-6.1.4disk0:asr9k-k9sec-px-6.1.4...

Unanswered Topics
Top Solution Authors