Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
Advertise a subnet without an interface over OSPF on FTD
by Nikolaos Milas -
SD-WAN Centralized policy force the source path
by StingShadow -
How upgrade Cisco Prime Infrastructure 3.4to3.10
by xiaorenwu -
Webex mobile rings for past calls when opened
by Sandeep-kanchalwar -
Looking for support with Webex App for Jira
by Joseph Chapman -
Installing and using OpenSSL tool
by NetworkMonkey101 -
Remove Agent Performance Statistics from WxCC Desktop
by tmessenger -
IOT Industrial Routing and Edge Compute Sandboxes Temporarily Offline
by raymair
Community Activity
BGP prefrence over static Routes
I have a setup in which i have 2 routers connected to same ISP A both via default route pointing towards ISP for internet.Now we want to add another ISP B on both routers however that ISP will use BGP with RIPE IP address over the internet.Now we wan...
EnableJabber2TeamsMigration does not show up on polices
ON CUCM 14SU3 EnableJabber2TeamsMigration does not show up i policies on jabber configuration file. Any idea why?it shows on https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2024/pdf/BRKCOL-2062.pdf
Installing and using OpenSSL tool
I am trying to install the openssl tool detailed in this guide - https://www.linkedin.com/pulse/anyconnect-ftd-pkcs12-openssl-matt-albrecht/I have the openssl-3.2.3.tar file. But not sure what to do next, I have a Windows machine..
Cannot unassign primary phone number with Webex API - people
Using PUT https://webexapis.com/v1/people/{id} I cannot remove the user's phone number and set it to null.When I have the following in the body:{ "phoneNumbers": [ { "type": "work", "value": "none" }]} The response comes back with the ...
How upgrade Cisco Prime Infrastructure 3.4to3.10
Hello,Now WLC has launched some 9115AXI and found that version 3.4 cannot recognize these APs. Should we upgrade each version one by one or can we directly upgrade across versions to 3.8 or 3.10
Wireless Design / External antennas
Hi all,it's some time ago when I designed a larger wireless infrastructure in an industrial/warehouse environment. Back then it was standard to use APs with external antennas to meet alle the challenges (high ceilings eg 7-15m, very long floors with ...
WLC 3504, 802.1x clients are disconnected sometime
Hi guysMy office is using WLC 3504:With some Cisco AP:Users complain me, they are often disconnected to the wireless (802.1x) 5-10 times a day.I tried to debug a client and this is the log when it was disconnecteddebug client log is in the attach fi...
Resolved! 9800-80 active and standby configuration out of sync - 17.12.4
I am attempting to upgrade our 9800-80 HA pairs to version 17.12.4 to resolve a certain bug. The upgrade from 17.9.5 went smoothly in the lab, but upgrading a pre-production pair from 17.9.4a has resulted in the standby being in a boot loop with the ...
C3850 upgrade failure
I wanted to upgrade the C3850 in stack from version 16.12.8 to version 16.12.11 in BUNDLE mode.The steps I followed: 1. copy tftp: flash: .... -> successfully 2. no boot system 3. boot system switch all flash:cat3k_caa-universalk9.16.12.11.SPA....
Webex mobile rings for past calls when opened
When i open webex mobile app, it starts ringing for the past calls I received on webex. This unnecessarily creates confusion for the user of this is genuine call.
Restoring back a Client who was REMOVED using Cisco Prime
Hi, if I have remove a client using Cisco Prime Infrastructure how do I re-enable or allow it back in to the network.
Increment contact priority in queue in WxCC
In one of my UCCX scripts I increment priority of the call as it waits in the queue. So call entered the queue with low priority and then I keep incrementing the priority using 'set contact priority' function in UCCX as contact awaits in the queue. H...
Looking for support with Webex App for Jira
Looking for support with the 'Webex App for Jira'. I was sent here by this link https://developer.cisco.com/ecosystem/webex/apps/webex-app-for-jira-cisco-systems-46131/ Trying to understand whether or not the Webex App for Jira lets me "associate a ...
IPsec over NAT444 issue
Hello Everyone I have to set up an ipsec tunnel with Lo0 as source of tha tunnel. Nat is activated in My CE and in the ISP level (NAT444)All ipsec and Nat configuration is ok but, and as I know that for the NAT to work correctly, the packet should pa...
Using DNS to resolve switch hostnames for NTP
Hey all, I'm pretty new to all of this, I just passed the CCNA in June, and have been working as a jr. Net Eng/Admin of my company for about 8 months now.I was asked to configure our core switches at our main office as NTP for the rest of our network...
