شيخ روحاني ❀ 43123 6341 212 00 جلب الحبيب ❀ التواصل العاطفي

شيخ روحاني ❀ 43123 6341 212 00 جلب الحبيب ❀ التواصل العاطفي

STP BPDU trying to go out of disabled etherchannel member port

In the above topology iosvl2-3 is the STP root bridge and it sends BPDUs out of G1/1 on the Po1 etherchannel group (LACP).  When I simulate an outage on g1/2 everything continues fine.  However, because the BPDUs are exiting out of Po1 member g1/1, i...

Cisco ISE and windows 11 WPA2-Enterprise

Hi All,facing an issue with devices that are in place upgraded from win10 22H2 to 24H2, when the device completes the update I can see it has not joined the network via wifi it should auto connect.When logging on and connecting to the SSID presented ...

AMA - Software Upgrade on Catalyst 9000 Series Switches

Ask Me Anything Event   Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from  Monday, November 4, 2024 through Friday, November 15, 2024. Our colleagues Rohit Chopra, Vaibhav Aggarwal, Anuraag Majumdar, Saquib Zeya...

Call waiting tone or missed call log CUCM v12.5

HiI have Cisco Call Manager v12.5 and have set the Busy Trigger to 2. In this setup, if someone tries to call me while I’m on another call, they aren’t notified that I’m busy. Is there an option to either notify the caller that I’m on another call, o...

NCS 540 password recovery

Hello,We have a NCS540 which we do not know the user pass to login. Is there a way to by pass the configured user pass as in ciso IOS? If not what is the procedure to reset the user pass thank you,

Is there a way to disable DNA from having to insert ip domain lookup?

Whenever I deploy template configuration, DNA always adds ip domain lookup. We have our devices setup with no ip domain lookup and my boss gets annoyed if he mistypes something and the device tries to resolve it.. Is there anyway I can tell DNA to no...

Problems with Call-home in c3850

Please can help me stopping this logs. i have tryied no call-home, and no service call-home, the logs persist.Nov 12 13:41:53: CALL-HOME-DETAIL: rate limit timer: httpc_enabled 1, status 0, sid 2Nov 12 13:42:53: CALL-HOME-DETAIL: call_home_process_ti...

CBS350 Allowing Inter-VLAN Multicast

I have multiple CBS350 switches on our site and after installing some new security software, I became aware that multicast traffic seems to be traversing between VLANs. I initially saw this on one of my sites that's using older SG200 switches so I th...

EOL for ISR 892SFP Router

I have been told that the ISR 892SFP router is EOL.  However, I cannot find any EOL notice on Cisco's website that this specific router is EOL.  Please see the following link:Products - End-of-Sale and End-of-Life Products - CiscoCan someone please c...

After booting from ROMMON USB stick is then no longer recognized

Hi,I have two 9300-24UX and on both I have the same problem. Both are factory-resetted and started in ROMMON. Then I booted the switch with boot usbflash0:<filename>.bin from my USB Stick. After they started, I will install and activate the IOS: inst...

VOIPS and PCs randomly shutting off and on.

We recently installed new Cisco 9300 switches and randomly, users have complained that their Avaya phones restart and PCs go off and on. I started running the show logs and noticed the following:  049632: Nov 14 13:11:06: %PM-4-ERR_RECOVER: Attemptin...

Helpdesk AA/Call Queue from UCCX to Webex behavior

Our current UCCX handler works like this:Press 1 for normal helpdesk callsPress 2 for emergency classroom tech issueOne agent on duty is on a normal call from the queue and then an emergency call comes in. The agent gets a pop-up notification and end...

Cisco 3650 stack random crashes - IOS 16.9.5

Hi, looking for any advice on solving this issue, any help would be greatly appreciated since I dont have an active TAC support account.I have a two member 3650 stack using IOS XE 16.9.5 that for the past 6 months crashes at random. It will be up for...

Cisco Catalyst 3850 Series Switches Data Sheet