Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1989784members
1346501discussions

Community Activity

Resolved! EWC Client issues

Hi All-I am upgrading a small site from an autonomous 3602 to a 9120 EWC.  I have a bunch of IoT devices that are having problems connecting.  Theie sessions fail about 50% of the time.  Debug analyzer shows this:Time Task Translated2024/10/10 03:39:...

Cisco 9200 err-disable AUTHMGR-5-SECURITY_VIOLATION

Hi Expert,Recently, one port on our 9200 switch went to err-disable state and the status LEDs are all off. The port configuration is as below: it is connected to a desktop PCThe logs is as below, it looks before it goes to err-disable state, the port...

117222400_0-1728434470316.png 117222400_0-1728441925852.png 117222400_3-1728434665278.png 117222400_4-1728434718331.png
117222400 by Level 1
  • 303 Views
  • 13 replies
  • 0 Helpful votes

ASA AD LDAP Authorization belonging to multiple groups

Running on a FP2130 with 9.18(4)34 but the same problem seems to occur on 9.18(4)40.I am trying to have a user belonging to multiple groups map to a single ldap attribute-map mapping the memberOf a group to IETF-Radius-Class for the group policy.The ...

PeterLMSD by Level 1
  • 30 Views
  • 0 replies
  • 0 Helpful votes

NAT for CISCO SDWAN (2 Internet)

Hello Fellas,I'm new to this community. We deployed an SDWAN in our organization. Our set up was 2 Internet ,1 router edge. We configured NAT(1st Internet)  but every time of failover (2nd internet take over) our NAT was working. We want that every t...

mvlimpangug_0-1728549505078.png

Consultation on Roaming Optimization for WIFI6

Hello everyone.I am currently using WLC5520-8.10.196 and AP9115AXI in the office. I have noticed that some clients occasionally roam to farther APs. These clients are all Intel's WIFI6 network cards. The frequency band of AP is 80MHz.The AP3800 serie...

xiaorenwu by Level 1
  • 243 Views
  • 12 replies
  • 0 Helpful votes

Clearing a NAT using EEM

I have this configuration: event manager applet clear_nat_1event track 1 state any maxrun 40action 1.0 wait 35action 2.0 cli command "enable"action 3.0 cli command "clear ip nat trans *"action 4.0 syslog msg "WAN Failover, cleared NAT" I have the max...