Can we mix Cisco VM-based with CASE-Based ACI MSO? For e.g Two VM-based MSO and one CASE-BAsed? And what are the advantage of using Case-based MSO over VM-based MSO?
Can we mix Cisco VM-based with CASE-Based ACI MSO? For e.g Two VM-based MSO and one CASE-BAsed? And what are the advantage of using Case-based MSO over VM-based MSO?
Hi, Planning to re-purpose 2 of the ACI leafs (N9K-C93180-FX) y migrating them to nx-os mode and use as core switch pair. I suppose I don't need specific licensing to move from ACI mode to NX-OS mode? Also, once switched to NX-OS mode what license w...
I ran into an issue where the 3 APIC's were using old passwords but I have not those credentials.I want to upgrade the APIC version from 2.2.2j to 4.4.4i, how do I do the upgrade APICs? Note: I Upgraded the APIC CIMC using the Cisco Host Upgrade Util...
We have Nexus 4k as our core switch at the data center connecting to the WAN (ASRs) and internet (ISR) routers.We are getting ACI into our DC (2 spine 10 leafs) and was wondering if it is advisable to replace the core Nexus switches with ACI fabric o...
Cisco Application Centric Infrastructure Simulator
Hi all,I want deep about Tenant in ACI, but I have some question.1) is Tenant same thing as VDC in nexus technology?2)Can I implement one segmen network IP ini two tenants? is it overlapping or not?3)Can I configure same access vlan ini two tenants?I...
how can i generate default route on apic bd ? thanks
Hello All,We are using ACI infra for our data center and running with 3.2(1m) version, below is our current setup. We are using same VLAN pools(1-549,551-4094) and mapped it two physical domains one for L2 out and other for physical servers .Another ...
Hello All, Actually we want to build automation utility with python or ansible for Fabric port provisioning on the basis of MAC learning from any physical server attached to any available free leaf port. Their are still number of considerations and ...
Hello,Is it possible to stretch INBAND EPG as L2?NTP server is in another location and ACI setup resides in main DC.currently ACI is purely in L2 mode and all VLAN GW is present in other location. Refer the attachment.thanks in advance
Hi there.We are going to implement the Cisco ACI Multi-Site solution between two sites. One of the main components of Multi-site is MSO (ACI Multi-Site orchestrator) which I found the "ACI-MSITE-VAPPL" part number for it. Based on the Cisco white pap...
Hello , Am trying to loign with Postman to APIC with the URL and getting an error with response{ "totalCount": "1", "imdata": [ { "error": { "attributes": { "code": "401", ...
Hello , I want to do Cisco APIC backup through Rest API or Ansible to remote locations. Can any share some recommendations and its process . RegardsWAQ
Hi community, Kinda frustrated with this case where vPC (and even Direct Port-channel) fails to come up with IBM Power 7 on the other end. E.g.- LACP vPC (or Port-channel) on ACI with all ports on IBM Power being configured as active adapters, mode 8...
When this command is executed, leaf101#show int eth1/30 transceiver details (eth1/30 : Unused port) Transceiver rx of unused interface in aci version Is it a bug that dbm is displayed as 0.000dbm, not N / A?Are there related documents?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-14-2024 12:36 PM | ||
07-11-2024 01:42 PM | ||
07-11-2024 03:28 AM | ||
07-09-2024 12:08 AM | ||
07-08-2024 02:37 AM |