Application Networking

We have an ACE 4710 that has two web servers in an active/passive scenario.  The issue is that if node 1 fails and node 2 takes over connections to node 2 stay active even if node 1 becomes available again.  Is there are way to ensure that node one i...

Can anybody point me in the right direction for changing the URL when the ACE is performing the redirection?I have the standard ace redirection to HTTPS set up and it is working fine.I have a wildcard certificate *.abc.com but when the application wa...

Hi All,I am trying to implement a "Sticky HTTP Content Configuration" for a client. They requested all traffic to the URL path /hellomyworld/ to be loadbalanced via sticky sessions and all the other URLs to be loadbalanced via non sticky sessions. I ...

Hi everyone,I"m assigned to upgrade our code on WAAS devices and I would like to ask some opinions and if my approach is correct. We have one Central Manager(OE547) with the 4.4.3b universal code on it. All the accelerators in the field have the 4.4....

How do I verify that hosts on different VLANs have connectivity?  I can't ping from a host on one VLAN to a host on the other VLAN even with a policy that allows ICMP in place.

Hi,We are using an ACE engine module(ACE20-MOD-K9) provide loading balancing service for two WEB servers and configured cookie for stickness. Below is the current configuration and it seems working fine now.The problem I was facing is before use para...

I have a CSS (WebNS 8.20.5.01) in front of an Apache server which is the front end to Oracle Fusion SOA.When a web browser connects directly to the Apache server using HTTP on port 41778, and submits a POST for a transaction, the client receves a 200...

Hi,      I have a ACE4710 setup to load balance a couple of web servers. The real servers all show as inservice as do the propbes and serverfarms/virtual servers. If I ping the Virtuual server ip address I get a reply but it I try to access VIP via t...

Hi I am facing an issuse of ssh accessing to the admin context of the standby ACE in a Active/Active Fault-Tolerance peer.I can ssh to the admin context of the active ACE. However, I cannot ssh to the admin context of the standby ACE.Should I also ge...

Hi Team,We have one WAE  device installed at the customer site that was received as Replacement part against one Faulty part of same model but now having problem as we are not able to run the IOS image with this device and giving the message as below...

We recently started suffering an issue with our CSS11501S-K9 units not performing URL stickiness on our SSL wrapped L5 rules.  I've spent dozens of manhours working on the problem, and have quite a bit of information to report, including a solution. ...

Hello,I've an ACE that is doing static nat for a couple of servers, no load balancing, just nat in this scenario.NAT works fine in and out, except for the SIP protocol.When SIP is used, the traffic stops at the ACE and it doesn't get forwarded to the...

Hi guys,I'm curious if that's possible. The idea behind is to create "special rserver" which is in fact a webfarm with per-request LB, and can be placed as a backup-rserver when primary one is overloaded.Let's imageine caching webfarm (A) with URL ha...

I have never used Cisco WAAS for wan op (I've used BlueCoat and Silverpeak) and have heard less than complimentary comments on its ease of deployment and overall functionality. I am currently looking to replace my aging Bluecoat environment and am cu...