Audio and Video Endpoints

Jabber SDKs for Mobile apps

Hi, Can anyone let me know if there's some Jabber SDKs available now for voice,video & other features of Jabber Guest for native mobile apps? As from the past posts, I came to know that there were some to be available that time. I wanted to know if t...

8821 API Support

Our goal is to push text to an 8821 handset. I do not see it as a supported Phone Model in the Cisco unified IP Phone Services Application Development Notes document. I believe the API I want to use is called Cisco IP Phone Text. Does the 8821 suppor...

API command issue - SX80 not able to accept calls from Crestron touch panel

Hi - i'm having an API commands issue between our Cisco SX80 and Crestron DMPS. When we are receiving incoming calls and go to answer on the Crestron TP, we can't answer it and it basically freezes. When we call the second time, we can accept it with...

Sx20 configuration

Hi Team,We have moved one of sx20 VC device from one location to another. Now we need to configure the VC device. For touch panel and codec VC VLAn is configured.but not sure how to assign IP to codec and touch panel Since no remote is available to e...

CGI Screenshot of an 8800 KEM?

A question for 8800 series phones. Does anyone know of the URL or way to get at the KEM (Key Expansion Modules) screen shot? I can get the base phone but need to get at the side cars (a/k/a KEM or Key Expansion Modules) too. Good base info that is w...

Jabber SDK multiline

Hi,I'm developping a web based softphone using Jabber SDK 11.8.3 and a CUCM (version 12.5 to support multi lines).How can I select active line through SDK? I found selectLine method in Deskphone class but nothing in Softphone class.If it is not possi...

Jabber sdk - 2 sessions in parallel on the same workstation

Hello,Does anyone have an idea if there is a way to use 2 Jabber sdk sessions at the same time on the same workstation. My usecase: we develop a Chrome softphone based on jabber sdk on many specific Web applications, with the Web communicator install...

Macro - DX80 - xConfiguration

Hey Guys, I am looking to build a macro that would send an xConfiguration Network IPStack: Dual command at 00:01 on weekdays, our DX80 keeps switching to IPv4 as we are using IPv4 in our CUCM but our network uses IPv6 any ideas?My script below:const ...

Resolved! Schema and Support for CiscoIPPhoneDirectory With Custom IP Phone Service

Hello, I am attempting to create a customized directory for Cisco phones by creating and XML based IP Phone Service. I have this working for a Cisco 8945 (SCCP) phone. The goal is to get this working for the various 88xx SIP model of phones, which it...

QuickSet SX20 Replacement Camera Cable

Hi, Are CAB-HDMI-PHD4XS2 and CAB-HDMI-PHD4XS (without a "2" in the end) same and/or interchangeable? We have a CTS-SX20-PHD4X-K9 which came with CTS-PHD1080P4XS2+ camera and the camera cable has gone bad. Original cable was CAB-HDMI-PHD4XS2 and want ...

Sandbox VLAN LAB

Hi All, I'm new in this sandbox world. I was reading the Collaboration 12.5 guide and for using Jabber endpoint the guide says :. Users can add and register other devices to the CUCM. However, these devices must beconnected to the Sandbox VLAN in or...

Modify Built-In Button Layouts

Hello - I was giving a DX80 at work that someone accidentally dropped and cracked the screen. Most of the touch screen still works except for the top right corner. This is where certain built-in buttons are stored such as turning on/off self view a...

Unity Connection REST API - How to Change Alias

Is there a method to change a Unity Connection (local user) Alias using REST API? I've tried doing a normal PUT that is used to change FirstName, LastName, etc with Alias set, but if anything other than the original Alias is entered it fails. Looke...

Jabber Web SDK Chrome Extension not found

The Chrome extension for jabber SDK 11.8.3 or higher version listed in the docs is not availablehttps://developer.cisco.com/docs/jabber-web/#!downloads-and-documents/google-chrome-extensionhttps://chrome.google.com/webstore/detail/cisco-web-communica...

Enable WebGL for webex board 70s

We are experimenting with the web apps and macros, is it possible to enable WebGL on the board for apps such as google earth or to view CAD designs? The message "Hmm. While your browser seems to support WebGL, it is disabled or unavailable" appears ...

Audio and Video Endpoints

Forum Posts

Jabber SDKs for Mobile apps

8821 API Support

API command issue - SX80 not able to accept calls from Crestron touch panel

Sx20 configuration

CGI Screenshot of an 8800 KEM?

Jabber SDK multiline

Jabber sdk - 2 sessions in parallel on the same workstation

Macro - DX80 - xConfiguration

Resolved! Schema and Support for CiscoIPPhoneDirectory With Custom IP Phone Service

QuickSet SX20 Replacement Camera Cable

Sandbox VLAN LAB

Modify Built-In Button Layouts

Unity Connection REST API - How to Change Alias

Jabber Web SDK Chrome Extension not found

Enable WebGL for webex board 70s

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

Widget or Web App for Microsoft Teams Call on Touch Panel

xapi HttpClient Post method timing out (solved)

cisco celling microphone

changing voicemail password failing on UC12.5

Soft Key URIs to Answer, Decline or Ignore the Incoming Call

IPPS - Language and don't show user without number

Extension mobility API: clearing call history and rate limit.

Jabber SDK add on - Connection with add on has been lost

Jabber Web SDK with 3 CUCM Servers

Cisco Webex Pro, Disable Onscreen User Interface