Cisco Catalyst Center

Hi is ist possible to import an existing C9800 config into DNA Center or any other way to get a WLC Configuration implemented 1:1 into DNA Center ?  I tried to configure the different profiles any policies from the C9800 into the DNA Center but there...

Hi everyone, I'm confused about Cisco DNA Licensing, and what relationship it has with the traditional lanbase, ipbase and ipservices licenses etc. So, if I want the ipservices level of functionalities, when ordering, would I need to get the DNA Adva...

Hello,I am having a bunch of trouble with our VPN lately, where people occasionally cannot connect to the domain when anyconnect fails to connect and throws this error:"The VPN connection failed due to unsuccessful domain name resolution"I have Googl...

I've had a Lenovo desktop for a year and haven't done much to customise it. I've been unable to connect to my home WiFi network while the computer is turned on for the past few weeks. In the taskbar, I see the network listed, and the connection state...

Hello everyone, NOTE: This is a new deployment of DNAC into an already existing network. So here is the scenario. The network device is using local authentication for SSH access. The DNA center has been integrated into Cisco ISE. DNAC has been config...

I've been banging my head trying to get lan-automation working on a stack of 9300 edge node switches. The switches are already connected with stackwise cables and stackpower. After using the PNP initialisation steps here (14 commands to clear out eve...

Gain better Insight into your Wi-Fi Network   The release of Cisco DNA Center 2.2.3 includes an incredible addition to our network deployment and monitoring feature set, the Wireless 3D Analyzer. It is a never-before-seen solution that allows us to g...

Hi,   I am trying to automate the Deploy action of the Fabric site in DNAC but I could find the API to do that. But when I inspect the developer tools there is an API call when we do Deploy. The API is /api/v1/scheduled-job with POST method.      An...

Hi, I am trying to Add port assignment for the Access points in the Edge device with No authentication template through DNAC GUI it successfully pushed the config from DNAC to the device. But when i try the same process with the API ("/dna/intent/api...

Test

I'm having a problem with generating a CSR following this doc.I have generated the openssl.cnf file like below.req_extensions = v3_req distinguished_name = req_distinguished_name default_bits = 4096 default_md = sha512 prompt = no [req_distinguished_...

Currently I'm only able to login into my DNAC cluster with maglev via SSH. How do I add another username and password for SSH access?