cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Collaboration Blogs
3838 Views
3 Comments
Did a little birdie tell you that there is a UI refresh of the Finesse desktop in 12.0? Are you worried that the custom gadget(s) that you spent so many hours building will no longer work? Did you hear that there will be agent to agent chat in this releas... Read More
  • Other Developer Collaboration
1154 Views
4 Comments
Start with Beep not working in Record_With_Confirm after 11.6 upgrade.Let me know if you are aware of this issue
  • Other Developer Collaboration
903 Views
0 Comments
BMP (RFC 7854) enables a BGP-speaking router to send various BGP RIB information to a monitoring station (e.g. it's pre/post-policy RIB-in per peer). This is useful, for example, where an SP wants to monitor all routes seen at an IXP, or seen by a route r... Read More
  • Other Developer Collaboration
2365 Views
0 Comments
Both OpenDaylight (as of Beryllium) and Cisco IOS XR (as of 6.x) now support the OpenConfig YANG models (for BGP both ODL and XR support the 2015-10-09 revision).In this post I will show how to create a BGP session from ODL to XR using the OpenConfig YANG... Read More
  • Other Developer Collaboration
451 Views
0 Comments
“It Just Got Real” was the theme of OpenDaylight Summit 2016, and it rang true throughout the entire summit. A great group of developers and end users came together to celebrate the accomplishments brought forth in the most recent release, Boron; share su... Read More
  • Other Developer Collaboration
601 Views
1 Comment
Image compliments of http://events.linuxfoundation.org/events/opendaylight-summitThe OpenDaylight Summit is next week, September 26-29. Whether you are new to OpenDaylight, an experienced end user, a developer of network applications, or a core contributo... Read More
  • Other Developer Collaboration
1231 Views
0 Comments
for the basics of this please see my earlier blog post.There are a couple of gotchas though mounting XR 6.0.x from ODL:a) you need ODL Beryllium-SR2 or later as there was a bug in earlier versions where ODL would fail to handle the deviation that XR 6.0 a... Read More
  • Other Developer Collaboration
598 Views
1 Comment
I've posted a bunch of scripts etc. to https://github.com/CiscoDevNet/opendaylight-setupfollowing the instructions there should enable you to get a Linux VM up and running with ODL (either directly, or using Vagrant).I've focussed for now on NETCONF/YANG,... Read More
  • Other Developer Collaboration
1834 Views
0 Comments
This is a short introduction to the opendaylight-startup-archetype which is the easiest way to get started writing an OpenDaylight MD-SAL application. An archetype creates a maven project from a template, giving you a working project to start from. mvn ar... Read More
  • Other Developer Collaboration
613 Views
0 Comments
Cisco is a founding member, leading contributor, and passionate supporter of the OpenDaylight open source project. OpenDaylight is an open source platform for building programmable, software-defined networks. Back in April 2013, Cisco made headlines and j... Read More
  • Other Developer Collaboration
1174 Views
8 Comments
So first off you need to install kvm/qemu 2.0 or better.then create a separate .vmdk file for each XRv or CSR1Kv instance (as config etc. will be written to the files they need to be read/write and be separate files per virtual router).A script for runnin... Read More
  • Other Developer Collaboration
1753 Views
0 Comments
First off we need to distinguish between the OpenDaylight and Cisco OSC API structure.In OpenDaylight the restconf API is at http://controller-ip:8181/restconf (replace controller-ip with your own controller's IP!)In Cisco Open SDN Controller (OSC) the re... Read More
  • Other Developer Collaboration
8089 Views
15 Comments
First off ensure you have a "new" XRv or ASR9K load (XR 6.0 or later) and a "new" ODL (Beryllium or later).Then ensure ODL is running the BGP and PCEP features (by doing "feature:install odl-bgpcep-bgp-all" and "feature:install odl-bgpcep-pcep-all").Confi... Read More
  • Other Developer Collaboration
2726 Views
2 Comments
First ensure that you're running XR 5.3 or later.Then ensure that in XR you've done "crypto key generate dsa" and that your config contains:netconf-yang agent ssh!ssh server v2ssh server netconf port 830note that on XR 5.3.0 you'll see:ssh server v2ssh se... Read More
  • Other Developer Collaboration
CreatePlease to create content
Top Experts
Last 6 Months
Content for Community-Ad
July's Community Spotlight Awards
This widget could not be displayed.