Data Center and Cloud

VPC-NX-9k-VRF-Routing-Vlans-int Vlans

I configure both cores (1 & 2).Create a VRF for each int VLAN.And default route for each vrfBecause router connect to Core1I create on this router two sub-ints, one for vrf DMZAnd another for Inside-ZoneSo the default route for VRF DMZ, inside each c...

APIC M2 TO M4 Migration

Hi everyone, We’re planning to migrate from Cisco APIC M2 to M4 hardware in a Multi-Pod environment. Our current setup includes a single-node APIC cluster running version 5.3, and I’d like to gather input from those who’ve handled similar upgrades. O...

EPGs Not Dynamically Associated on Leaf Access Port in Trunk Mode

Hello, everyone.I'm facing an issue with an access interface on a Leaf switch. I have two tenants configured—DEV and QA environments—and within these tenants, dozens of EPGs have been created with VLAN encapsulation. These VLANs are learned from an ...

Concern about adding POD2 in ACI-MultiPOD

Hello everyone,i have 2 ACI system in 2 site DC and DR, they are working independently, so i have planning build ACI multipod.i have a question that if i have create POD 1 is seed ( that mean configuration in DC is remain) whether configure in ACI DR...

ACI Multi- Site stretch BD

Hello Team,If I want to stretch BDs, in the stretch template besides the VRF/BDs with L2 Stretch know enabled and EPGs, before doing that safe I have the following questions:1). Is there any traffic impact when importing into NDO, and I need to do it...

Fortigate HA cluster connect with Nexus 9504-Failover session issue

Hi guys, Need some help now. We have one fortigate HA clutser connected with two Nexus 9504 (Topology in attachment), Each fortigate has two Agg-link. We tried to test some traffics like Telnet and FTP session during Failover, the session has to be ...

Resolved! UCS Firmware update to Chassis

We are preparing to upgrade our Chassis to 4.1.3m after a previous update to the fabric interconnects and currently have two critical errors:1. FSM:FAILED]: Update identities to external identifier manager(FSM:sam:dme:IdentIdentRequestUpdateIdent). R...

IMM Key Features & Functionalities

In this webinar, you will discover how IMM Simplifies managementenhances visibilityStreamlines operations for your infrastructure

increase KVM timeout in UCSM

increase KVM timeout in UCSM. Is there a way to increase the KVM timeout. The problem I am experiencing is that when I have the KVM running and it is idled for couple of minutes it will log out. I want to increase that timeout. I was able to incre...

CSCwi60509 - Excess fans shown in APIC GUI

APIC reports excess 14 fans failed.i.e excluding the 14 fans that really exist. APIC 1-14 fans will show ok but unreal 15-28 fans as failed. How do I get rid of the messages or stop them?

Introduction to Cisco Intersight Automation API and Ansible

This webinar will include the provide you the following: Comprehensive Learning: Gain insights into Intersight’s foundational features, advanced integrations, and automation possibilities.Interactive Sessions: Experience live demonstrations of key ca...

Advanced BRUM Script Building

Join us for our first session of the three Synthetics sessions, where a Cisco Observability Engineer walks you through building your first synthetic scripts, for both BRUM and API. Feel free to simply watch or take the opportunity to get hands-on exp...

How to downolad Deployed EPG per interface from Leaf switch in APIC

Hi I am using Cisco ACI version 5.3(2c) in my DC infrastructure.I need to compare the list of ‘Deployed EPGs’ on each port of several Leaf switches. I would like to download a list of ‘Deployed EPGs’ from each port of a Leaf switch and compare such a...

CIMC Upgrade from 2.x version to 4.x version

Hi All,We're trying to upgrade the CIMC of APIC from version 2.x to 4.x of UCS M4 200 Server but facing issue. We tried upgrading using both CLI & GUI but failed both way multiple times.Anyone has any idea about how to resolve this issue.Regards,Vikr...

Anyway to configure management IP for ACI switch in CLI, without APIC?

There are some spare switches with OLD ACI image (v14.1). I need to get them upgraded to v16.0 before being compatible with the APIC (v6.0.6c). I know the USB drive approach but it is kinda difficult to access the site...I do have the KVM access to t...

Data Center and Cloud

Browse the Community

Cisco Developed UCS Integrations

UCS Director