Data Center Switches

I'm currently working on a AngularJS front-end and Django REST back-end. I've been using django-rest-auth in the past to authenticate my connections between the two, but I now have to integrate a SSO authentication using SAML.I've looked around and d...

Hi Dears I have Switch 3850 In Datacenter A and BSwitch 3850A  can ping  3850B Over Layer 3I need Cross VLANS Id from 3850A to 3850B (Layer 2 over Layer 3)No How can Cross VLAN2 from 3850A to 3850B and Get mac address ?vxlan Or xconnect L2tpv3 Can do...

Hi All, I have configured 3 VRFs in my spine & leaf arc where one of my servers is connected to the leaf named compute containing 2 Nexus 9k Swithces, where these 2 switches are configured with VPC .Here I have a query whatever the logs generated in ...

What effect do the following settings have? Also, is the recommended value valid or invalid? mac address-table loop-detect nve port-down

I have implemented BGP EVPN fabric using nexus 9300 serial switches.  1. My spine behave as a border as well. 2. External routes connected to border spine is not learnt by evpn fabric, but External router learns the evpn routes Border spine BGP confi...

Please refer attached LAB setup (diagram.png). We have setup VXLAN fabric over BGP EVPN. PC A and PC B in same VRF over VXLAN fabric and can communicate each other. As per the diagram some outside networks (PC X and loopback 0 of router) needed to be...

Hi AllI am currently looking to dual connect a new FEX unit (C93108TC), to two separate head units (C93180YC) to achieve resilience.I have currently connected the first head unit to the FEX which has worked fine, however I want to confirm requirement...

I have nexus 2148T FEX that I wanna use as dumb switch. no need vlan.it seems by default when I connect my pc, all its ports are in shutdown state.?1. can I change it to "no shut" without connecting to 5ktqUPDATE1:-answered myself because I already t...

HiIs it safe to add create new zones and add them to an existing zonest and then activate in production hours? or would this cause disruption for live storage traffic.?? Thanks

Hi AllOn the Nexus N9K-C93180YC-FX3 , is FEX support still continued through onto NX OS 10.x or are FEX modules no longer supported on this OS train.   Nexus 2K modules are B22-HP, N2K-C2348TQ-10GE and N2K-C2348UPQ-10GEMany thanks - Martin   

Those passwords are stored in encrypted format in the configuration. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/9-x/unicast/configuration/guide/l3_cli_nxos/l3_advbgp.html#63308  but the NXOS-Switch obviously can decrypt th...

HW INFO:-Nexus 5k-Nexus 2148TI want to test vpc but my friend said need minimal 2 FEX to test itSo I wanna buy used 2248TP-E?1. Can I test vpc with two different FEX model2. Do I need to install license to test vpctq