Network Management

With customer and they are installing DCNM SAN on their 1010 and the PAK file needs a MAC address.  What MAC address do we use and how do we obtain it ?  I'm assuming it's tied to the VSB it's installed into or the 1010 but need to be sure and cannot...

Hi!The LMS 4.2 topology map could not start with IE8 on Windows XP client. But it is working well with Mozilla!The java install was success!We get the following messages!andAny idea?Regards,

We have a central location that has numerous vpn connection to many different clients. Instead of using the TFTP server on LMS could I point LMS to use a tftp server on the client lan? That would make transfer of IOS so much fast instead of trying to...

Hello,I've installed Cisco ACS 5.3. After I created several internal users (defined password and enabled password), Identiy Groups, Access Polices, Network Devices and AAA Clients (e.g. Cisco 1841) for Radius and configured my Router like this:...aa...

Currently, my report links are displaying the server as "lms" instead of "lms.domain.net".  Where do I change this within LMS?

Hi guys.I am re-configuring some routers to generate traps for our new monitoring tool.I have noticed that after I applied the snmp trap configs that we are getting traps for PRI channels (30 voice channels), which I wouldn´t like to. This happens wh...

I really hope someone can help with this. I am running a demo of the LMS software for a proof of concept. I can poll my devices across my VPN and all works fine unless I try to copy a file to or pull a file from the flash. I get the following error:S...

....

Hello,I want to update the license for LMS 3.1 so i went throughout the Licensing link within Common Services - Server - Admin - Licensing and then clicked the update button, selected the path where the license file is located and then it shows a mes...

unable to launch ctc release 9.2 via Vpn Clientmy pc configuration:      windows XP,SP2Internet explorer 7Java 1.6.0_26When I  try to launch ctc localy or via Vpn client,my pc display :EID-2199 the node is unreacheable because its type could not be d...

Hi ,I have cisco lms 3.0 and i login in it with user admin .But when i opening any tabs in  RME and CS Then that tab gives me error" you may not able to use some of these function it  you do not have the required privileges "I am login as adminHow ca...

Hello, i have created the following applet:event manager applet test1 event track 2 state down action 1.0 policy dns.tcl 1 2 3Router(config-applet)#action 1.0 policy dns.tcl ?  LINE  The list of arguments for the policyas describe in help,  "1 2 3" s...