Network Management

Hello,Cant update packages via psu (GUI&CLI), because there should be a 2nd psu process running and that because a lockfile should be open.But there isnt:D:\CSCOpx>dir /S Psu.Lock Volume in drive D is Ciscoworks Volume Serial Number is 9046-C1CCFile ...

Hi all,I've got the following error in Inventory Collection: 'RICS0001:Internal Error,unable to process the collected data from the device.'System is CW LMS 2.6If I search the web I get the following Cisco document:http://www.cisco.com/en/US/products...

Hello everyone,I am trying to reduce the amount of syslog messages. Can anyone tell me the lowest level of notifications I can set that will give me an alert if an Interface goes down?Thakns in advance!

Windows Server 2008 Standard LMS 3.2 with RME 4.3.1 When I try to select devices to check/compare device configurations in the RME Archive Mgmt menu (RME -> Archive Mgmt -> Compare Configs) no device shows up for me to select. I know the configurat...

Hi all,         Any one help me to configure router and switch log on windows server. I dont have any idea please send me link or guide to configure syslog server on windows.  For PPTP vpn users also.

I've got c3750g with 12.2(55)SE.When I try ifSpeed (1.3.6.1.2.1.2.2.1.5), i've got 1 peak 999999999 and then only 0. Polling is 1 second.When I try ifHighSpeed (1.3.6.1.2.1.31.1.1.1.15), I've 0 also.When I try ifInOctets from snmp-v2 MIB (1.3.6.1.2.1...

my mrtg setup current only gets/graphs bandwidth utilization on our 800 and 1800 routers and a few ASAs.  is there a way to get/graph temperature and cpu utilization etc.?

I started a RME Inventory EoS/EoL Hardware Report on devices and got the appended error log. Cisco.com and proxy authentications seem to work well.Any idea how to solve this problem?ThanksWolfgang

All,I've been going back and forth with development on a way of best leveraging a log rotation capability in our newly deployed LMS 3.2 rollout on Solaris 10.My issue:As of now, we use the services facility built into Solaris to start/stop the syslog...

Hi there, Im trying to configure our cisco catalyst 4948 switch management port. I have gone through this document http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/50sg/configuration/guide/sw_int.html#wp1138747 i have created ip vrf mgm...

Recently upgraded to a DROID and any SMS messages sent from LMS are now extremely limited. I get the Event ID and just the title of the Alert ID line, that's it.ALL SMS came over fine before using Windows-based phones and Blackberries. The ISP is the...

Hi:We are using CiscoSecure for authentication and authorization for differente apps.Specifically, any user already in the ACS database is authenticated to log in CiscoWorks LMS, with HD role (this happens although none of the CiscoWorks apps have be...

Hello,got following error message, if I want to do any RME action:License Server/Daemon Manager is down. Please check license.log for more information.Its a new installation Discovering and CM is working. CS=>Admin =>licese shows valid license:1. CM ...

IPM Group Admin Server giving this error, Bu the Process are runningOGS Server ErrorErrorError in communicating with IPMGroupAdministration Server.It may be down or not yet up. Please make sure that the IPMGroupAdministration Server is up and running...

Hi All,I have installed LMS 3.2 and DFM don't send email notifications. Here is the NOS.log file.