Network Management

Hello,When i look at my devices in the DCR, some of the devices have their ip address as the hostname.Some device are ok and are showing their hostname as the display name.in global settings the preffered DCR display name is the hostname.What might c...

Got this question about the "Link Duplex Mistmatch".I have a 6509 and a 3560E connected with a 1 gig trunk.Now, the CW2K reports a discrepancy for this trunk, "Link Duplex Mistmatch".The 6509 and the 3560E has an 1000BaseSX SFP3560E-port configinterf...

I have a csico 850 touterMy router has 2 interfaces:Vlan1                     192.168.1.1Dialer0                   192.168.2.1  I want CW to use dialer0 as the primary interface. Dialer0 has cdp disabled, is that the reason CW use VLAN 1interface ins...

Hi folks,         We are using LMS 3.1, in this we are using IPM 4.1, I am not getting how to configure it and start to work by it. Can anyone tell me some idea abt configuring the IPM.

Hi,DFM doesn't seem to recognize the 2960 PoE switch ( Catalyst 2960-48PST-L). The status of the devices is unknown. I tried the software and device update but it prompted that there are no updates for DFM. I am using LMS 3.1. What should I do?Thanks...

Hello,I'm trying to better understand how UTLite works and how it interacts with CW.We use a tool called "Desktop Authority" to manage policy on our PCs. When a user logs in, they authenticate to AD, then desktop authority takes over and works its ma...

Hi,I have a problem with RME to reposit Catalyst 2960 IOS. It does not find the IOS in the flash. It works fine for all other devices but 2960!I receive the error message SWIM0014. I collected the inventory successfully but still do not see the IOS. ...

I want to enable EEM. Trigger event is to down L2accessport in Another Switch. SwitchA,SwitchB assigment Tunkport(g1/1)and accessport(g1/2)Trunkport(g1/1) is directly connected each other.When it detects a down accessport(g1/2) in SwitchA, Enable EEM...

Is the smartport macros feature deprecated in SXI?-Dave

HiI got the message "Error in communicating with DCA Server. DCA Server may be down. Please start the DCA Server and then refresh the page."at the ciscoworks.so i try to resolve it.  please look at the that steps.and i draged the log.how can i resove...

"CISCO" Non-compliant with RFC-3411 bug for SNMPv3 EngineID:The following are a list of SNMPv3 Engine ID's from various Cisco switches and routers running various IOS versions configured to use SNMPv3.8000000903000014a81cc3018000000903000014a81cc3408...

Hi to all,i have an odd problem with Cisco MIB for IPSEC:We have a GETVPN network established for one client. Everything related to encryption works fine between group members (IKE phase 1 and 2). Our client request us to monitor all active VPN tunne...

I have several WAAS units all WAE-512-K9 which are listed in  RME device supported by Cisco Works, all running 4.1.X and aboveHow ever they have an OID:xx.9.1.760 where as Cisco Works only supports OID:xx.9.1.759 & 776. So the units are "unknown" in ...

Hello,I'm running LMS version 3.2 on Windows in ACS mode. To access Cisco.com I use a proxy server, this proxy server has access to the Internet, but connections to "inside" servers (like ACS) are not allowed.I've noticed that the HTTP/HTTPs Connecti...