Network Management

do i see this right? i have a switch (2960 L3 enabled) i have set it up to route between vlansi have a router connected to the switch on a stickif i set the gateway on a pc to point to the switch i will be routed on the switch from one vlan to the ot...

Hello community, I'm working on Cisco PfR and I've encountered some problems when using SNMP for getting the PfR values. The router IOS is Cisco IOS XE Software, Version 16.06.05PfR MIB OID is 1.3.6.1.4.1.9.9.772 when I try to execute : snmpwalk -v 2...

Just testing out simple iBGP with 2 routers using a loopback address each. Before peering the loopback addresses and configuring "update-source", the loopback interfaces are able to ping each other using iBGP. After peering the loopback addresses, th...

Hello Team,I am facing issue in IP Netflow Exporter Packet sending problem in C2960X. Records are added and client send packets but exporter not sending to Netflow Stealthwatch device. SW1#show flow exporter statisticsFlow Exporter NETFLOW_EXPORTER:P...

Hello all,I know that this topic has been addressed before, but I would really need some insight...In order for PI 3.8 to be able to populate "Clients and users" when the device is configured with snmpv3, one needs to add the context vlan- command.Qu...

What are the common problem in SG series, and what is the alternative if budget is not an issue. I am facing issues in SG 350 models like Freezing of switch,sometimes not able to telnet, ssh, or console into the device and not able  to get a connecti...

1. If I create different VLANs for different Departments in a switch, should I create INTERFACE VLAN  for every VLAN created or can I simply Route that segment of IPs to a Core switch for Internet. 2.If I enable IP routing in a switch, can I write Bl...

what are all the information we can get from the simple PING and traceroute command. what are all other commonly used troubleshooting commands in networking.

Can I get NBAR2 info or L7 Application information from (Cisco Catalyst 2960X, Cisco Nexus 93108TC, Cisco SF300, Cisco SG300 & Cisco SG350) those devices? I want to find out bandwidth utilization for every L7 application like facebook, youtube and ot...

Hello Guys, I am saddled with the task of blocking all user from loggin into the network devices except for few.  the devices and users are not behind firewall.  What they are asking is for anybody aside from the specific user should not even be pres...

hello buy a new cisco dph 154 on amazon. when I try to enter the S/N It tells me that it does not exist s/n not found. they sent me a new one and it tells me the same thing. is there any way to check if the s/n will be fine before making the purchase...