Network Management

Hey Guys,   I Just wondered if there was any best practice on how a server rack should be laid out?    This is with regards to supplier CPE, Layer 3 switches and access switches for end user connections... Is there any specific way this should be lai...

Hello All,   I have set up a RADIUS Server using Windows NPS is working fine for our Cisco 3750 and 2960 switches. But we add a Cisco SG 200 Switch, we cannot login to that switch via WEBui using a RADIUS account.   Please help. Below is the accounti...

Greetings everyone! I am actually doing my own personal project and need your help to fix my issue. My current problem that i facing is Ripv2. I've made my own research but cant seems to fix. Anyway the description about my project is to set all my r...

How to configure virtual server

I got a 1941 router and trying to do a password recovery.  I recycle the router and do a CTRL-Break on it, then I do a confreg 0x2142Next, I do ENABLEFrom there, I'm at the Privleged Mode and should be able to do copy start run and configure terminal...

Good morning,   We have recently updated to Prime Infrastructure 3.3.1 and I'm now having some issues getting to /webacs/api/v3/data/InventoryDetails .     What I'm getting: function windowTitle(){ var productName = 'Prime Infrastructure'; if(product...

What can be an impact on the datarate for example when i combine multiple path in order to increase the datarate? Which factors would affect the datarate in this case?

Hi Guys, I am having one Cisco switch WS-C3850-48XS-S and i want to connect Darktrace security appliance to it. Darktrace appliance is with RJ45 connection. I want to know if i can connect RJ45 cable directly to this switch OR i need to buy SFP modul...

Hi , I have update our Cisco Prime Infrastructure from 3.1 to 3.3 and now facing very slow performance from login to toggle between tabs and pages. If I restart the server everything works fine for about 15 to 30min.   Can somebody help me please?   ...

Hello   I cannot claim to be a Prime Infrastructure expert, but I am unable to select the Internal Antenna Type when creating a new AP Template for Lightweight Access Points   if anyone can point out where I am going wrong, I would be greatly appreci...

Hi   So I have a cisco ISR 4331 and have been told the router was supplied with a throughput license to scale the performance to 300mbps Why does the router have 2 throughput licenses in different stores ? Is this router correctly licensed for throug...

Hi, I'm looking for advice on how I can schedule a backup of the running/startup config on our cisco switches, plus backup IOS images - put them also on a schedule? We have a big piece of work where we need to replace all our 3750 switches with 3850 ...

Hi ,     I have 4 NTP server configured on the switch, how does NTP server chosen among the 4. which value takes the precedence for server election. It keeps varying among four. Which value is considered for election Stratum ref clock delay offset   ...

I'm currently running Prime Infrastructure 3.2. I've seen several devices where there is no performance data (CPU,Memory,etc). The device is successfully being managed by Prime and in some cases, also has an archived config. Given this, I see no reas...

After upgrading to 3.2 I am not able to setup Prime to send emails when APs is down eg. In 3.2 they have removed the email notification field in the alarm view. Instead you have to create "Notfication Policies". I have tried multiple times to create ...