Network Management

We are using Cisco any connect VPN and when are trying to copy a data over VPN we are facing dead slowness. For example, If we copy 1-2 GB file from server to machine/laptop over VPN from remote site we are getting 30Kbps speed. Our bandwidth at both...

Hello, I have EEM script to dump top talkers to a flash, but I don't want to exceed the file size to 5MB (for example), is any way I can make this as a circulate file? thanks. event manager session cli username nameevent manager applet Check-TOPTALK...

We have our 800+ managed devices sysloging to our PI 3.1 server and utilize the Syslog Viewer - Historic Syslogs with the "Syslogs in the last 24 hours" filter to look for emerging issues and/or patterns across our enterprise.  We were longtime users...

Am running HSRP in all the sites Both branches are connecting to the head office as per the scenario   I have configured ip sla on the active routers to track reachability of the links. If the link goes down, they will decrement priority by 50 to al...

Hi all - TIA for any help you can provide.    I suspect others will find this use case very useful.  I have RTFM, but maybe I am missing something.  I don't have a strong background in programming.  Some shells scripts and perl, but been some years s...

Tell me please how to configure Tunnel Backup with dynamic IP on the Cisco RV325 router.There are 2 routers Cisco RV325, Firmware v1.3.2.02, between them configured Gateway to gateway tunnel.The first router (R1) has 2 ISP providers which are connect...

Yesterday, we upgraded our instance of Cisco Prime Infrastructure to 3.1.6 (from 3.1) and added device pack 12. This morning, we discovered that several of our switches had the following line removed from their configuration by CPI: snmp-server host...

Hello I am trying to make Prime perform a write mem redundancy reload shelf on a VSS switch in order to restart both switches in the VSS The switch asks for a confirmation - <enter> seems to be the only answer that does not abort the operation VSS-...

Hello All, Router: ISR4321 IOS: 15.4(3)S4 IOS-XE: 03.13.04.S I have a GigabitEthernet interface that is configured with "ip address dhcp" to get a dynamic IP Address from the Cable modem/router connected to this interface. And I'm wondering if ther...

Is it possible to configure remote archive/backup of ios devices to an sftp server? I need to archive switch and router configs to a server, but can't use tftp because it's insecure.

Hello colleagues.I have found some snmp trap OIDs from cisco devices, which cannot be found by Cisco SNMP Object Navigator:.1.3.6.1.4.1.9.9.198.0.3.1.3.6.1.4.1.9.9.513.0.19.1.3.6.1.4.1.9.9.513.0.25.1.3.6.1.4.1.9.9.513.1.6.1.0.2.1.3.6.1.4.1.9.9.524.0....

I have Cisco Prime Infrastructure 3.1 in my network and it monitor third party servers such as windows servers, linux ,..but in the monitor page show me Cisco callmanager in device type , so is there method to change the device type? another question...

Hi, i am trying to enable ssh server port 830 for NETCONF. I have the pie k9sec active. But when i commit the command: RP/0/RSP0/CPU0:dc18xr01(config)#ssh server netconf port 830RP/0/RSP0/CPU0:dc18xr01(config)#commitMon Jun 19 15:54:09.977 CEST The ...