Network Management

I am trying to use netconfig to change the port config on my switches. I want to use an adhoc rule to determine if the port already is configured for 802.1x (authentication port-control auto) authentication and then modify those ports to "authenticat...

Device will be rebooted.SWIM1113: Device Reboot operation failed or Reboot Verification failed.The device is not running the new image after it is rebooted.Verify the configuration used to load the new image. Verify whether the new image exists on th...

Hi there,I am demoing a 2504 Wireless Lan Controller and am trying to get AVC monitoring set up in Prime Infrastructure 2.1 with base, Lifecycle and Assurance licensing (also a demo). I have added the 2504 to PI and can get snmp traps, configuration,...

Windows/LMS 4.2.2 Is there any way to lengthen the time between the post software distribution reboot and when LMS verifies the device came back up?I have a 3750 that takes several minutes (more than 20 mn) to reboot. The IOS upgrade job runs fine bu...

Windows/LMS 2.51 RME 4.03Is there any way to lengthen the time between the post software distribution reboot and when RME verifies the device came back up?I have a 3725 that takes several minutes to reboot. The IOS upgrade job runs fine but fails wit...

Hi! I would like to know if WS-3850-24T-S is supported by LAN Management Solution (LMS). If yes, in which version of LMS. In table of device's compatability http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-2-3/device...

I am having this error from the CNR nrcmd> dns flushcache501 Connection Failure - dns flushcachenrcmd> dns reload320 TRE_NOTLOADED - Bad id or server not loaded.TRE_NOTLOADED - Bad id or server not loaded. The server is in production environment and ...

Hi,I have an Cisco Catalyst 3750 and i would like to check if the switch is in overload when i turen on a cuple of systems to it?? Thanks Lauren dvir

Hello folks, can someone suggest why the script below is not returning anything?My goal is to execute 'show hsrp detail', if HSRP output contains pattern indicated below, I should be able to generate an alert somehow.Please let me know what I am miss...

Hello all,i want to achieve a specific functionality.i have a catalyst 3850 with several L3 Vlans. on specific SVI, i want to detect automatically the active hosts that are connected to this Vlan-SVI and for those hosts, installing a /32 routes into ...

Hi Friends, We would like to configure broadcast storm control in our LAN to detect/avoid mac-address flooding. What is the best way and Can I know how to decide the raising threshold & falling threshold values ?.. Please suggest. Regards,S.Tamilvana...

Hello together,I see in our firewall log that the LMS server is polling some devices which have been deleted a long time ago. I can't see these devices in the inventory or anywhere else in the Web-Gui.Do I have to rebuild one of the databases, which ...

Dear All, Good Morning, I have 1941 Router, Im using ADSL Connection. but we are moving already to the new office and we apply new internet connection.  Please help me to change the Username and password of our internet connection. Best Regards, Ace