Network Security

I am doing a project in Site-to-site VPN using IPSec and monitoring and managing the network using cisco works(VPN/Security Managament solutions V2.0). My network is working fine...i can ping from both sides and the "show commands" shows that the pac...

I have 3mg DSL running client 4.06. I have a very reliable and consistent 2.6mg actual bandwidth. My VPN account is set to terminate after 4 hours of inactivity. The tunnel drops at 5-8 minutes. If I start a continuous ping to an ip on the same L...

In a VPN cluster when the exterior interface fails/unreachable the VPN tunnel fails over as designed.Question: Is there a way to configure the interior (lan side) interface as a critical interface (i.e. the the interior interface fails the VPN device...

I am trying to use the Auto Update Server to update my firewalls, but it is not working. When my pix 501 tries to get its updates I get the following error in the 501's log: Error 612003 Auto Update failed to contact: https://10.10.5.6/autoupdate/Au...

I have a pix and I need to change a static ip to a different static ip how would i go about doing so?Thank you for your help

Some advice required.I have been asked to develop a plan for managing our VPN environment. Unfortunaly experience is limited and I would appreciate some feedback as to what others are doing in similiar situations. We have approx. 100 remote sites wit...

Hi , Though this question is related to CiscoWorks LMS, but this is very basic one. Please help me out.I am in the process of installing the CiscoWorks 2000 LMS. Today I had a discussion with Solaris OS ops team on the CiscoWorks installation. Cisco...

I understand that to install Ciscoworks, I need root level permission. Do I need root access for any day to day activities? or through admin user I can login and maintain? For 'admin' user, a unix levle profile will be craeted? or just a application ...

I have an issue on a cisco2600 where the show version uptime shows different to the snmpwalk sysuptime. Any ideas?Many thanks, Rory.COGPBR004#sh verCisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-JS-M), Version 12.2(17a), ...

Hi.During CS3.0 installation I got an error:ERROR: Unable to Change password for DSN cmf ERROR: After install you can change the database passwordERROR: by running /opt/CSCOpx/bin/dbpasswd.plI tried to run /opt/CSCOpx/bin/dbpasswd.pl script, but got ...

I have a classic EZVPN setup with a VPN3020 as the server and about 20 or so 831 clients. My problem is that you can't issue the qos pre-classify command under an EZVPN profile. In this case how would I prioritize traffic witin the EZVPN tunnel?

Hi, We have been using CiscoWorks 2.2 with SP3 for managing & monitoring security Agents, Firewalls & Sensors remotely. but for the past few days we have encountering problems in it and the subcomponents like IDS MC,CSA agents etc are'nt opening. t...

Hi everyone!One of my costumers is connected to my Internet network (im an isp), the costumer is using dynamic nat, and on the other end, there is a PPTP server (on a hosted environment), the costumer complains that sometimes can´t connect throught t...

Hi everyone,There is an inherited limitation on the number of span ports on the Cisco switches. this limit is 2 local span port and 64 rspan.There is a work around to expand that using Virtual Span to increase the numbre of desination port.In my setu...