Network Security

Cisco PIX 506E hangs during boot. This is as far as it gets:CISCO SYSTEMS PIX FIREWALLEmbedded BIOS Version 4.3.207 01/02/02 16:12:22.73Compiled by morlee32 MB RAMPCI Device Table.Bus Dev Func VendID DevID Class Irq 00 00 00 8086 7192 Host Bridge 00 ...

i have pix 7.0 .there are pptp server and pptp client on the two side of pix.i know pix 7.0 doesn't support pptp.but if it's also can't let pptp throughtout? how to config pix 7.0 to permit pptp connection through pix.thank you very much.

I have an ASA running v7.1 code and I recently added the command "sysopt connection timewait" which fixed a problem I was having. But now my telnet and SSH connection to the ASA will timeout in about 10 seconds, if I remove the command then the telne...

I've configured failover according to the Configuration Guide document and am scratching my head about a particular issue while testing failover. Failover seems fine when I disconnect the failover/state cable on the master or when I turn off/reboot t...

I would like to deny internet access to a user but also have it redirect them to an internal webserver that tells them who to contact to get access. I know how to deny access but need help configuring to redirect.

Hi,since the CCA is optional in a solution NAC appliance which are the benefits to use it ???I've seen that during the logon you can use traditional Win logon or CCA logon which are the main advanteges/disadvantages ???Thanks a lot for helping hintsO...

Hi, I have a PIX-UR 7.02 firewall with active/active license and a PIX-FO 7.02 with an active/standby license. when configured for failover both boxes show up the active light, when I power down the active traffic does not flow.I feel I need to make ...

Hello all,Please give me your suggestions on the following:1) I need to enable trunking/vlans on the outside interface of ASA 5520. I have 2 routers on the outside, with different networks, which needs to be connected. Am sure I can enable vlans on t...

I'm currently work with pix 515E, with Ios version 6.1.I want to know, if this pix firewall can support multiple instance of firewall.How the configuration o instance of firewall is done ??How can i configure trunk with vlan ??regards.

We are logging syslog for a large # of PIX firewalls. We also have 5.x Sensors inspecting traffic flowing from the inside int of the PIX. For some reason sig 4600 fires constantly, attacker is PIX inside and victim is the syslog server. We are seeing...

I have a pix 501 10 user. I can ping from the console to any public IP Address, but not from an inside address. I am including my config in hopes that someone can tell me what I am doing wrong for my inside to outside connectivity. TIAPIX Version 6.3...

I am using IPM 2.5 and am trying to creare several collectors that us the defaultUDP echo operation. I have checked the routers that I am using and they have either IPSLA running or thr rtr responder statement in the router. Once I try to creat the c...

I recently did an update from 6.3.4 to 7.11 on my PIX and I have 2 "problem" commands that i cannot find what they have been deprecated into.1) "sysopt ipsec pl-compatibleApparently this no longer exists, and the upgrade didn't like the "ipsec", but ...

Has anyone successfully installed VMS 2.3 on Windows 2003? I recall having done this before, but I managed an already installed version of this. Any help would be great.