Currently our conference capability is 3 paricipents MAX. I need to find out if there is a way to have more than 3 participents for Ad Hoc ?Thanks,-Zulfi
I am getting AvDcq_MC Error 1003, with a description failed getting format name for MSMQ queue. Error Code: MQ_ERROR_SERVICE_NOT_AVAILABLE.I have not seen this error. What impact does it have on the system? Where can I go to find out more info? Ho...
I have an SRST setup with MGCP up and running. The only requirement I am still missing is how to route inbound PSTN calls (PRI) when on SRST mode to an alternate 800 number (for customer support). I tried the CFNA setting for SRST, and the inbound ...
Has anyone actually configured the Automatic Selection (GetIP.asp) for the Network Audio Settings on the IP Softphone. Docs are lacking regarding this configuration. Any insight would be helpful...thanks.
Could somebody confirm the interdigit timeout defaults to 15 seconds in CCM 3.3. I know it is 10 seconds for other CCM versions but my courseware states 15 seconds for 3.3........Is this right ?I am sitting the test tomorrow and don't want to drop ea...
Hi,I have Unity 3.1(5), and i have few questions:1. Is there any way for the administrator, to see how many messages are there per subscriber? And the mailbox size currently used by each one?2. I'm using the Unity as a voice-mail only, what is the re...
I'm running CallManager 3.3(2) w/SP-C and Unity 4.0(2). We have the 4.0(2) VMO form loaded and everything works except playback to the phone. This is not a calling search space/partition issue and it is not a one-way audio issue. When we hit the p...
We have about 700 unity subscribers and for few of them the MWI is not showing up, only the envelope will show up next to the extension.When the new message arrives nothing shows up (envelope or MWI), I have to manually refresh the Message Waiting In...
We had a power outage over the weekend and all the VoiP Phones give you a busy signal when you try to dial out. Is there a way to reset the phone so they will work?
After upgrading to Unity v4.02 from v3.1.3, DB Walker reports that all Subscribers have a Null Exit action. Same DB Walker ran clean on v3.1.3 prior to upgrade so not sure if this was caused by upgrade.Anyway, I am attempting to fix this using Bulk...
I've been working on a Call Manager / Baypoint SMDI integration using a VG248 and now that I'm finally getting SMDI mesages from the Baypoint voice mail system, the VG248 appears to be sending incorrect SCCP messages to Call Manager.MWI On = 1999MWI ...
Whenever I start the cisco destop agent it says: "Another agent is already logged into the specified extension"Has anyone seen this problem before and remember the fix?Thank you very much.
Hi!I'm implementing an VoIPoFR Network and it's working fairly well.The problem is that when I try to configure fragmentation on the Data PVC's at least some applications start to have very poor performance in spite of the link not being congested.Co...
