Other Collaboration Subjects

Hi,As you all know, it's possible to override 802.1p/CoS field coming from PC attached to Catalyst switch.This is accomplished in 2 (two) ways:- either by '(config-if)# mls qos trust extend cos <value>' - or via '(config-if)# switchport priority exte...

Hye......I installed CCM 6.1 and UCCX. i create all the mobility extension on CCM and users accordingly. UCCX showing my users detials and i configuared all the things accordingly. But when i login my phone the UCCX real time monitoring always shows ...

Im still new at this, but how can I ping between my laptop and UC500. I have a cable connected in one of the PoE ports on the UC to my PC ethernet port. I did the ping command from the UC to my PC and vice versa but never got it. I would always get a...

Hi All, How do i verify 7960 IP phone information (IP address,CME image version, extension number) using soft key/ key combination?Thank you,

After I upgraded to CUCM 7.0, cdrs are no longer being sent to our remote billing server. The call manager is able to ping the box and the billing server user name and password are correct. Looking at the trace logs shows that the call manager believ...

I have customer requesting activity on inbound trunks. They have PRI's and SIP trunks. I need to see how many call hit certain inbound numbers. I have checked the CDR reports but they are very general. Does anyone have any solution. This customer...

anyone knows the default passord for ata 186?thanks

We have one disk on our call manager server, can we put another disk and make a raid configuration on this server ? Thanks

Dear All,Can i use ATA (SIP) for making VoIP international calls. If yes, then how can i implement it.Your consideration in this will highly be commendable.Regards,Malik.

Hi,I have some applications developed to CCM 4.3, and now I have to make them work with CCM 6.0. My problem is that I need to access to the information pin/password of the users. I have been study the Cisco Unified Communications Manager 6.0(1) Datab...

Hello,I have a Bunch of Cisco Ip Phone 7940 models that are setup to use call manager. I have setup an FTP server and downloaded the latest SIP Images. I can see the log file on the tftp server that verifies the phone has connected, and even download...

Can someone point me out on what's the difference between WIP310-G1/WIP310-G2/WIP310-G4 model? Is it a different release/firmware update or what?

Hi,I have a 7937 conf station , I have the sccp 1.3.3 load files in flash and proper load and tftp server commands , but the phone still has sccp 1.1.1 , is this a bug ? or am i missing something.I have reset the phones but still it has older load on...

When i select the agent call summary report , and the filter parameter is set to resource group name or team names, does not apear all the agents, only apears the summary of the team supervisor. Its strange because weeks before when i select that fil...