Other Data Center Subjects

Hi Guys Talking DCI as Active/Active with OTV F5 SLB acts as SLB per DC Qs: when we do vmotion for certain VM from DC to DC how vCenter notify F5 about that event  thanks

if a controller VM is down, can that node be used for compute?

Configuration: 7 nodes cluster  4.0.2b Healthy.Status: replication and recovery setting has no failure checking HX connect GUI. Also tried the VM recovery worked fine.Problem description:running basic Invoke-HXFailover command below generates error m...

Hi, I have a requirement to deploy N93180-YC-EX as extended switch from my existing WS-C4506-E switch. Attached image to brief the scenario Kindly suggest best way to extend. N9k will have vPC configuration , not really sure about Catalyst side when ...

 Here attached small datacenter using spine and leaf   using OSPF point to point for device advertise and iBGP for server advertise is it best practice please advice me    

Hey Folks, is there anybody using port-profiles in Cisco Nexus switches? Or how do you manage ports like ESXi server ports with the same vlans on your Nexus Switches? I use it and managed it by DCNM Lan Classic. Now, I updated DCNM to 11.5 and LAN Fa...

We’re trying to deploy BMA with HP server iLO5, but we get stuck on the PXE boot We Already check the boot64.efi, boot.cfg, pxelinux.0, ipxelinux.0 files and seems to be OK   The PXE server and DHCP server works because we deploy a test VM on the sam...

Hi , I wanted to confirm if HyperFlex data platform Plugin is compatible and visible with HTML5 of vCenter client side?

Hi all, i'm trying to follow this guide to deploy FCoE on our network FCoE Configuration Between VIC Adapter on UCS Rack Server and Nexus 5500 Switch - Cisco I am ok up until the vfc interfaces on N5k-A and N5k-B in our case we have only one single S...

Hi All,I need some advise on a DCNM policy.I am setting up a Dcnm controlled VXLAN fabric.Inside the factory, route-leaking between different L3VNIs is actively used.Now, when placing L3VNI on a leaf switch, the required configuration lines are added...

Hello I have 2 x queries with regards to DCNM The first is that I had to make local device MTU settings on multi-site interfaces due to issues being caused with vxlan traffic. I now need to get DCNM to synch the correct configuration from the device....

Hi All,I am currently deploying an HX Cluster and I am running into the error below, looking for some assistance with resolving:Stage: Create Cluster ValidationErrors: Errors found during Create Cluster Validation.Create Cluster Validation - Overall ...

It is a lab setup. In short, the DataPlane Multicast part of the following cisco document not working for me. https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DCI/whitepaper/DCI3_OTV_Intro/DCI_1.html#wp1185866 My Network: I have...

Hello,what kind of settings does one configure in the Access Policies settings vs the Fabric Policies one? Thanks. _ ZGreg