Other Network Architecture Subjects

I want to create a vlan and add all my servers to that vlan to create its own network. I then want to add our new IDS system to sit in front of that server farm so it will alert us on the inside of whats going on...This server farm will incorporate a...

I get 1% packet loss and latency between 200-1000ms when pinging from the switch(cisco 2970) to any directly connected interface to a router (mainly 7206VXR) My concern is i have never seen packet loss or latency in a core network before!! i know tha...

I need suggestions.I have 80 users that need to be compartmentalized into about 50 groups. Each group may have from 1 to 5 users within it. Each groups needs security from the others. I desire compartmentalization so that each group's traffic and poo...

Hi!Can I connect C3750/GLC-LH-SM with CAB-GELX-625 patchcable toC4510/(WS-X4306-GB + WS-G5484) with MM patchcable via Multimode cable ?I know it's possible connect two SM GBICs via MM cabling with using conditioning cable, but what's in my case?Vilia...

I've got two 2600 series routers running 12.3.11 with AIM compression modules on either end. When I do a "show ppp multilink" I get the following:Multilink1, bundle name is group1 Bundle up for 1w1d, 8/255 load Receive buffer limit 24384 bytes, fr...

I have a cisco 3508 xl switch that before had no UPS on it and was hit with several power fluctuations and now is in constabt reboot. if I try to go into utility mode it goes to the utility m,ode but when I try to do anythinng on the switch it tells...

Can this card be used with SUP720?

Hello.I want to enable dhcp server on an aironet, but I want that listen only on wireless interface.On ethernet I want to disable it, because there is another DHCP server on the net.Is it possible this configuration?ThanksDaniele

I have a 256k link with Cisco 2600XM routers at either end running 3des encryption with 32mb flash and 128mb dram. I want to upgrade the link to 512k or 1mb but am concerned that the encryption will not be able to handle this increase in link speed. ...

Is it possible to tag routes that are learnt from either a particular EIGRP Neighbor or that come across a particular interface when all Interfaces are in a singe AS?I need to do this so that at the edge of my AS where I redistribute I can remove the...

Hi!anybody know about how to configure a 2500 series router, having two serial ports com0 and com1 for connecting with two line simultaneously i.e., one VSAT and second LEASE line, so that it will automatically switch between the two line whenever on...

I posted this in Network Infrastructure but maybe this is a better forum for it...---------------------------I have a rather interesting setup that I need to find a solution for. Basically I have chosen to use CBWFQ for QoS. I have two routers, let's...

Wld like to know how to determine if the switch has any unusual symptom, like attack bla bla bla...pls adv.

I been having some problems with the import part of RME. Evertime the ANI server does a discovery I go into the Discovery Metric and I see that it has discovered over 1000 devices but I only have 609 in my RME. Also on the Discovery Metric I have d...