Other Network Architecture Subjects

I'm having a hard time trying to get my ip pool to be routed to my upstream routers. I have an AS5300 setup for dialin access only. I have a loopback0 interface defined with 192.168.1.1 /25. I also have an ip pool defined with 192.168.1.20 - 192.1...

I would like to implement NTP on my 6509. Can somebody walk me a comman lay out to accomplish this. I will be using an public website for this.Thanks

I have an 2600 series router with NM-16am whis has been configured for Dialin.The usename and password are configured in the router itself. Can any body help how to configure my router for three attempts to login by the windows 98 PC with Dial-Up-Net...

hi,i have hpov nnm 7.01 on hp-ux, and lms 2.2 on windows. we integrate them by using integration package. lms 2.2 needs java 2 v1.4.2_02nnm 7.01 need java 2 v1.4.2_03clients with java 2 v1.4.2_02 run lms & nnm web interface properly but not home base...

Is it possible to specify sending http out one interface and ftp out another?I have looked in PBR and I know that a static route will not fix it!Any help?!Thanks,Rob

I have a cisco 2503 series router, where in as soon as I attach the ISDN line on to the router, it start's rebooting, The Ios file is 'igs-i-l.110-22.bin. Please give me a clue to resolve this issue.I have also tried reloading the same file.Ephraim

Dear all, I have an E1 line connecting two sides on my network, The user complained in the remote side from times out and disconnections to the application in the centrald site.I check the configuration and nothing seems to be incorrect,But noticed t...

Situation - a 2950 48 port sw is fully utilised. However, it is believed that not all ports have a device connected at other end.Does anyone know of an easy way to determine which ports have no device attached and those that have a device that is con...

Hi,What happen if the MHSRP enabled interface itself is down on the second router.Suppose you have two router connected back to back via F0/1 interface. R1 and R2 MHSRP configured on F0/0 interfaces and tracking the Serial interface S0/0; R2 router i...

Does it possible to assign a port to two differentsvlans? (Multi-vlan command)i dont't need for AVVID, I need it for normal IP traffic on a catalyst 4003 Thanks for the support!Best RegardsAndrea

HiI have a catalysts 5509 using CatOS 4.5(4) and the cabling is a lil bit messy now. I have many switches connected to it (3com, and cisco 2900's). My problem is how to check to which port are the traffic goin out. Say in the old inventory I have the...

Is it possible to connect two 2600 routers which have two different networks to one 3500XL Switch.switch connects to two differnet wireless antennas which has users on 2 different networks. As well some office computers.If so any suggestions on the b...

Hi - I have 4 Cisco 2950's running the client end of my network, and one Netgear GS5167 Gigabit switch behind some of my servers. Currently, each 2950 is uplinked to a Netgear port indiviually, with spanning tree enabled on the 2950. This setup there...

Hi All,I have a query. There is a requirement to disable STP on one of the VLAN in my campus network. It hosts about 100+ Vlans and is totally a 6500/5500 network. There is no bridging. Its totally a hub-spoke network. Spokes connected to Hub via sep...

Hello,How can I deny access by mac address in 3500XL series switch or in 3800 series router.I want to block access some of computers in my network by mac address.Tarun