Other Network Architecture Subjects

Hi Folks,I have a query on the incoming calls on the ISDN interface. Is there any way to disable incomming calls on the ISDN interface but allow out going calls through that interface. The topology is explained below.The Central site is connected to ...

hi we r hving 2 internet G/Ws from 2 service providers at present we r using one as primary and the second one as backup.in addition to this some of the incoming/outgoing traffic is distrubuted based on the location reachability(to improve latency/re...

Does anyone know when Netflow Analyzer (now Network Data Analyzer) version 4.0 will be available?Many thanks,Tracey

I have created a series of 24-hour report that I will like sent to my boss. How do I set it up so that it automatically sends this report out? Also when I click on Syslog messages, it always comes up with NO messages-Please check that this is set up ...

I am looking for some tools to help me test the performance of a Cisco Catalyst IP network. I have downloaded IPerf and this seems to offer what I am looking for - it is a client/server application and offers UDP streaming at user configurable rates...

Hey all,I have an active VTP domain at one campus of multiple switches - 6500s, 4000s, 3500s, 2950s, etc. As you can see I have combination of CATos and IOS. I need to change the VTP domain name for the entire domain. I can't find a document expla...

I have SEVERAL routers that need to have their running configs backed up automatically on a weekly - or at least monthly - basis.I'm calling a shell script via cron thats doing this just fine. The only thing missing is some fine grain control what t...

Does anyone know what a correct CLI or procedure to upgrade an old 2501, the router does not recognize "copy tftp flash:" command (It only has IOS v10.2(5). I don't intend to upgrade the ROM: System Bootstrap, Version 5.2(5). Thanks.

The "No Shutdown" command does not seem to work on my Cisco 1605R with IOS 12.0.4T. Why is this? After I put "no shutdown" on interface ethernet 1. Then showrun, "no shutdown" was not listed anywhere. Does it mean that "no shutdown" does not work on ...

What is the difference between a 2621 and a 2621XM ? n other words what exactly does the XM stand for?

The "No Shutdown" command does not seem to work on my Cisco 1605R with IOS 12.0.4T. Why is this? After I put "no shutdown" on interface ethernet 1. Then showrun, "no shutdown" was not listed anywhere. Does it mean that "no shutdown" does not work on ...

I have a cisco 6400 with oc3 (stm-1).There are aprox 190 VP's active and 1000 VC's being distributed from atm 8/0/0 to atm 1/0/0, 2/0/0, 3/0/0 and so on. My question is how can I make transmit shaping to the metro network on the VP in the atm 8/0/0?...