Other Network Architecture Subjects

Hi , I want to manage a Network of 500 cisco devices with cisco works 2000. The network will be managed remotely. Now I hv some doubts on BW requirement to manage the network. Can anyone give some tips on it.Apart from this what are the best practice...

Will a packet that is marked with a 5 get better treatment on egress than a packet marked with a lower packet without any extra configuration, such as a policy map, on an interface?

Hello, I want to upgrade flash and dram memory in an mc3810. I'm not sure of the exact hardware version of the router; here is the sh ver command:------------------router#sh verCisco Internetwork Operating System SoftwareIOS (tm) MC3810 Software (MC3...

What is the good command to see why mutual redistribution is not installing routes vice into each other routing protocols for downstream routers

Hi all ,Is FEC (fast ether channel) (Pagp) compatible with the 802.3ad IEEE specificationor is it a cisco feature only compatible with cisco?In other words can i aggregate fast ethernet links cisco facing another switchor server working in 802.3ad

hi could someone confirm what is the best way to Use Microsoft cluster software.We are having problem to get it working when the servers are plugged directly into the switch. I have some people saying we need to put servers into a Hub to get ...

how can i copy ios in a catalyst 2950 switch in the rom monitor mode when the ios is crupted and switch boots up in rom monitor mode.

Hi,I have a 2600 series router in the Hub location with 1 ISDN- BRI line. And I have 2 spoke locations with 1751 router with 1 ISDN-BRI line.Requirement: I need to dial to both the spoke locations using the same 1 BRI line at Hub using one channel fo...

Hi,I am trying to understand the basic difference between Private VLANS and VLAN ACLs. To me it appears that you can achieve basic security using VLAN ACLs to control traffic within the VLAN.In what circumstances Private VLANs would be necassary\bett...

I am running CW2000 as a management tool for about 30 LAN sites. The CW2000 setup is generally configured, ie:talking to all switches, paging on alarms etc. I do not manage the WAN routers within the network, and have no hardware probes. The switches...

I have problem connecting to monitered device through Telnet. If i have SSH enabled on device, Does CW2K will able to connect to device through SSH?Thanks in advance.Jay

i want to know if is posible to download a cisco6509 software, because the version that i have it´s old. i have cat6000-sup.5-5-6a.bin versioncan you help me?i need a 6.xxx version of CAT OS my shwitch is a catalyst 609

Can someone tell me any formula used to determine line speed and number of T1 circuits needed when transmitting a 500 Mbyte file over the WAN?Thanks in advance

I am making my LAN redundant by adding a 128KB circuit to connect to the WAN. I am currently running a T1 to the WAN. I am using Cisco 2621’s for both circuits. I would like to use the second circuit (128KB) to help optimize my network instead of ...

What does a access-list do when applied to an VLAN interface? It filter all traffic to or from any interface that belongs to that VLAN?access-list 101 permit icmp any any echoaccess-list 101 permit icmp any any echo-reply!interface VLAN10 ip acces...