Other Network Architecture Subjects

Hello There,I'm pretty new to switching and am having an issue I could use some problem determination guidance on.Situation is thisI have a server connected to one of my 5509 switches that is getting a large number of single collisions and multi-col...

Here is the question,If a 1500byte IP datagram goes out of router which is configured for link fragmentation at every 500 bytes, assuming the safe reachability of three fragments at its final destination, how many acknowledgements can I expect back a...

I keep getting this on my change audit, it is a Catalyst 6509 and it is flooding my log. I have went to Administration, Inventory Change Report Filter and checked everything that has to do with Flash. But I still get it.thanks in advance, jgSection: ...

Here is the scenario: We have our main site with 2 ISP connections, our own /24 external subnet and AS number. We are running BGP on the router connecting us to the ISP's. We are looking to bring up a "warm" site for our DR Plans. What is the best ch...

Hello all,I have a question regarding the 827: after adding an 8MB mini flash card, the actual flash memory remains the same (2048/8192). It looks like the 827 either doesn't recognize the additional flash, or I am installing it the wrong way.Does an...

trying get dsl transport service working from verizon, one end of the circuit is dsl the other frame-relay. The dsl is mapped directly from the dslam, to our frame-relay hub site. I see the pvc for the frame side showing up in my frame router (4700)...

Hello All:Just getting my feet wet with cisco routers and I need to change a telnet password on a 3660 that is already configured without telnet password.What is the command to accomplish this.Thanks

I am trying to get the method to mirror ports on a Cat 500 and cat8510, if anyone can help

Sorry if were going backward. What interface is being use for x.25 connectivity? What cable will I be needing?Thanks.

Hi Friends, am beginner to VLANs. we have around 200 Users Operating on a Single Router(2611). Users Span across 10Nos. of 2900 Swicthes.Now i tried to Configure a VLAN port on one of My Switch, with a workstation attached to i...

I have two cisco 3640 routers one for mumbai and other for delhi. We have registered IP of class 10.26.11.0 and using subnet mask of 255.255.255.128.On serial link can we use the same network with diffrent subnet like 10.26.11.0 with mask of 255.255....

When will CiscoWorks LMS run on Windows 2003 Server?

Hi , I want to manage a Network of 500 cisco devices with cisco works 2000. The network will be managed remotely. Now I hv some doubts on BW requirement to manage the network. Can anyone give some tips on it.Apart from this what are the best practice...

Will a packet that is marked with a 5 get better treatment on egress than a packet marked with a lower packet without any extra configuration, such as a policy map, on an interface?

Hello, I want to upgrade flash and dram memory in an mc3810. I'm not sure of the exact hardware version of the router; here is the sh ver command:------------------router#sh verCisco Internetwork Operating System SoftwareIOS (tm) MC3810 Software (MC3...