Other Network Architecture Subjects

I am trying to join two LAN systems together using BGP over fibre. Don't ask me why I am using BGP. I have to as part of the design.Both systems have two 6509 running HSRP. I can get them to exchange routing tables when configured with eigrp but when...

I am new to vlans and trying to determine my needs for equipment. I have on order 2 ws-c3550-24-smi switches but in doing some education I think that I actually need to have the ws-c3550-24-emi to do rouing between my vlans. Is this correct?

We have some of our sites who are interested in using NAT to be configured on some of our routers. For eg the outside IP will be 10.1.85.xxx and the inside ip will be 192.68.0.xxWe are currently employing 1601's and 1700's.Do I need extra hardware, l...

I have a 3550 that I need to reset all VTP/VLAN Database back to default. Is there a global command that can be used to do this without deleting all configured vlans, and also set vtp domain back to NULL instead of having a domain configured?

Hi,I'm evaluating CWW . I cannot get a cisco view of my 2620 test router as i don't have the device package. How do i get the device package for this router?Will i able to add device packages to CWW?regards,jimmy.

Background :CiscoView 5.4 trial version and Cat4006 12.1.13-EW1.PC Java is 1.3Symptom: Can¡¯t change any duplex or speed setting.Is this because of limitation of trial version or something else?Some people recommend upgrade Java to 1.4. But after upg...

Is this possible? Currently we have 6 remote connection coming in through our telco on one cat5 line. These all go to a switch at the telco then out to 6 sites with 2621's at them. We have 100mb links between all the locations and the central loca...

Hello,It seems that the rtr ftp agent introduced in 12.1 right up to 12.2 does not respect the source-ipaddr directive. Here is my configuration. It seems everything is correct, but using a sniffer I see that it does not change the source-ip for pack...

Hi...Does anybody know a way to allow the display of traffic stats (rx,tx,broadcast, etc) of FE subinterfaces??? else than MRTG or other SNMP based programs?TIA

Hello,I will be configuring a T3/E3 network module in a 3745 for frame relay soon. This will be the first time I have configured the T3 module. We will have multiple remote sites in this frame relay cloud. Could someone review my sample configurat...

We just bought some used 2501 routers for educational purposes. Along with the routers came serial cables (DB-60 to V.35) so we could connect the routers back to back. After hours of troubleshooting we measured the cables and found out that the cable...

Based on IEEE Draft P802.3ae dated August 15, 2001, the ReceiveFrrameoperation is synchronous and the operation does not complete until a frame has been received and the fields of the frame are delivered via the output parameters with a status code: ...

I have a cisco3662 ,when boot ,output "Bad RAM at location 0xA0000000: wroto 0xAAAAAAAA road 0xA8AAAAAA" ,and reboot.Can anyone tell me what that mean.Hope your answer.

Hi,I am trying to traffic-shape on int fddi2/0 to limit traffic to 15 MB. The line I am using is:traffic-shape rate 15000000 15000000 1000Traffic passes thru until traffic shaping kicks in. Once it does I cannot ping my interface from the outside, ...

What are the steps required to find out where the problem is or is not when troubleshooting.Explanin testing of customer circuit, equipment, interfaces, routes, csu/dsu etc. Thank you for any suggestions.