A satellite provider will provide a DSU with 2304kbps clock rate to the router. Can it be work? Will the V35 cable length also be an issue?
A satellite provider will provide a DSU with 2304kbps clock rate to the router. Can it be work? Will the V35 cable length also be an issue?
Sam Halabi said:The preceding access list will permit 172.16.0.0/16, 172.16.0.0/17, 172.16.0.0/18, 172.16.1.0/24, and so on.To restrict the update to 172.16.0.0/16 only, you have to use an extended access list of thisform:access-list access-list-numb...
The above process does not seem to start automatically on boot on my lms 4th edition server. This causes problems when a config change takes place. Is this process supposed to start on startup of the other LMS processes? If not can this be set to aut...
Is there any way to execute debug commands on a router immediately at startup/bootup, like for instance saving the debug commands in a text file on the routers flash and then instructing it to execute the file with the commands ?Console connection is...
Could anybody explain the sense of "set logging history" CatOS command?The command reference guide says:"The Catalyst 4000 family switch holds syslog messages until the number of messages equals the defined size of the history log, once the defined...
Hi all,when I config bidir multicast,it did not work. The manual said it just use:ip multicast-routingip pim rp-address x.x.x.x bidirto work and you need not config any thing in the interface. But It did not work. My topology is:e0-R1--R2--R3--R4--R5...
Does the following models support BGP4,MOSPF and DVMRP:3745,3725-rps,2610xm,1751?
I have two paths to a remote site. The preferred path is via IOS Router A with a F/R interface and a PVC to the remote F/R IOS router via a point-point subinterface. The backup path is via IOS Router B with ISDN.In Router A I have two static routes...
I have a Cisco 4000 router. On front panel, it says, "4000 Series", but in show version, it shows, "cisco 4500 (R4K) processor (revision E) with 384K/4096K bytes of memory. Processor board ID 06450824.Is it 4000 or 4500?Thanks,
Does the SOHO 91 Router have the same 'Virtual' Aux port capability as the Cisco831 Router?Want dial-up/async into Aux and across VPN to another VPN Router then Aux/Async connection.Thanks,Bob
I have a dos command-line utility called wrnet that allows me to instruct a Cisco router or switch to copy it's running config to a TFTP server via SNMP. Any IOS related products seem to work just fine, but whenever I attempt to use this utility on ...
Hi,I want to monitor my routers using MRTG. Where can i find the OIDs for eg CPU load, latency, for the cisco routers?Someone mentioned to me SNMPWalk... what's that? anyone care to explain more?Thanks
We have a 1720 router with 1 BRI port both channel (128k) running with PPP multilink command. We would like to raise the bandwidth and install additional BRI port and possibly combined them all to have 256K.We do not have the luxury of spare ISDN li...
Hi,I need monitoring count online voice users that connected to cisco 3660 fxo ports,i have search cisco mib files but not found.Could you please help me how can monitoring online voice users on 3660 that using fxo?Regards,M.Arshad Rad
Our organization is currently in the process of replacing our 3Com Corebuilder, layer 2, backbone switch with a Cisco Catalyst 6513. We want to take advantage of the 6513's layer 3 abilities and avoid having to send our interVLAN and internetwork tr...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-26-2024 02:28 AM | ||
08-07-2024 06:15 AM | ||
07-17-2024 11:08 AM | ||
05-29-2024 04:52 AM | ||
02-14-2024 04:00 AM |
User | Count |
---|---|
2 | |
1 | |
1 | |
1 | |
1 |