Could there be a problem if we use 8.3 SMF instead of 9/10 SMF as recommanded by Cisco? We have all Corning Cable in place and I know for a fact it's 8.3um. Any help would be appreciatedThanksCEM
Hello,I have a 3640. With the she "show diag" I have the following indications :Slot 2: 1.5M DRAM Compression Engine Port adapter Port adapter is analyzed Port adapter insertion time unknown EEPROM contents at hardware dis...
When I try to run a "back up data now" from the server config menu, it fails giving a backup.lock file error saying that a backup.lock file exists. This file is present, but only because I initiated the backup. When data gets backed up from the sch...
Platform that would handle a dial-up access to ISP (No DSL or Cable available). Need LAN and Async (Aux port?) access across VPN to Central Site.PC - - -Router/VPN - -Dial-up ISP access - - Central Router/VPNAsync - Rou...
We have a Site with 4 vlans separated by an MSFC. Currently we're bridging on the MSFC between the VLAN's since we need to pass lat traffic across all of the Vlan's.This being the case, there is one root for all of the vlan's, and spanning tree issue...
I have two 7200 series VXR routers that I need to connect together via T3 (point-to-point). They both have 1DS3+ modules in them. Any help on what needs to be configured would be great. Thanks,Todd
HiThere is any way to rate limit file sharing applications like kazaa ?I was trying before with rate-limit at the interface but today too many applications use a random port instead of a static port.thanks
From the same server, there are two NICs. NIC1 connects to switch 1 and NIC2 connects to switch 2, am I able to achieve loading balancing thru both NICs or one will be active and one will be standby? or Is it more like brand name issue, different v...
I want to clarify the behavior of OSPF “default-information”. I have 2 routes and 1 Firewall to exit to outside. They on the same segment..R1Interface e0 Ip add 1.1.1.1 255.255.255.0!Ospf process 100 Network 1.1.1.0 0.0.0.255 area 0 Default-inform...
Hello colleagues,I have a Catalyst 6509 running CatOS, and when I type ´sess 15´in order to access the MSFC, I get a ´Module 15 not installed´ message. When I type ´switch console´ I can access the MSFC but it is in ROMMON mode.When I type ´dir bootf...
I config as5300 with callback,but when as5300 successful call back to the remote client,after 2 minutes, the call always being disconnected, I don't know why? thanks!Benny
We have got a new Cisco 3640 router. I connected the console to a system which is running cisco tftp server. All the interface in the router is shutdown and the interface is not connected to any network. I wanted to upgrade the ios to the latest. I ...
I would like to setup FEC using my 3524 switches and my Windows 2K servers. However, there seems to be a lot of options for FEC (source based, destination based, IP, MAC...) which are very confusing. Which option should I use in my case?Thanks,Dieg...
