Is it possible to assign a different pvc number to an interface as shown?Router(config)#int atm1/1.184 point-to-pointRouter(config-subif)#atm pvc 171 1 171 aal5ciscoppp virtual-template 4
Is it possible to assign a different pvc number to an interface as shown?Router(config)#int atm1/1.184 point-to-pointRouter(config-subif)#atm pvc 171 1 171 aal5ciscoppp virtual-template 4
Company has two internet connection 1 x 128K and 1 x T1Each connection is connected to a different Router.Router 1 1600 128KRouter 2 806 1.54MbitRouter 1 Ethernet Address 10.1.1.1Router 2 Ethernet Address 10.1.1.2I would like to set everyones defa...
What are my option for encrypting data over frame- relay? Can this be done with cisco ios?
Currently I have a class C network that is attached to the internet. I would like to keep my current setup, but extend the class C over a private network to another location. In the end there would be two class C's sharing the same internet connect...
If you have a remote site which needs to access a server at teh host site. Is it possible for the server to appear to the remote hosts as an IP address on the same IP subnet (i.e. the subnet of the remote LAN), using NAT ?I think this means that the...
when first starting Ciscoview 5.3 on Win2k platform, I receive a Java Applet error says that "Can not restore device list".The next error messages says that "Can not retrieve addlet command". The 3th message says "Can not retrieve splash screen name....
I have installed Ciscoworks 2000 CD 1 edition 4 plus the cw-cd-one-ed4-p1-nt patch kit. on two different machines. I am having a problem with what java plug-in should be installed on the system at the end of the installation.On one machine I am left ...
I have an OSPF network over a frame relay hub and spoke configuration. I want to forward broadcast's over the frame links, however I do not want to use the "broadcast" command. I understand I can do this through policy routing. Any help would be ni...
I need to include an NUI facility in TCP to X25 translation, so far I have only been able to use X25 map with NUDATA option, this is no good as it enapsulates the packets instead of transcribing the payload into an X25 packet.Thanks
Hello,I have got a problem getting a multi vlan port to work properly on a C2924XL (IOS 12.0(5)XU). I often experience loss of connectivity between the server ONE plugged into that multi vlan port (#1) and other servers plugged into the single vlan p...
Feb 13, 2002, 3:23am PacificI have a HOST with OS/390 and three OSA Fastethernetand I have define a VIPA. These Three OSA are conected to a 6500 (three differen ports).VIPA is a Virtual IP Adrres, that I can reach through any OSA adapter. How can I d...
I am setting up a new 2948g switch. It came with a screwy config preloaded and I am having some problems setting everything straight. 1. I cannot ping my PC from this switch, but I can ping the default gateway. I can ping the switch from my PC. I am...
We have deployed Cisco 1601-R routers configured for dial-on-demand over ISDN satellite links to connect our remote messaging servers to our hub. The idle timeout has been set to 45 seconds, a lower value causes disconnection problems.The remote site...
Hi all,I have a customer that he need configure multiple ISDN B channels to achieve a 256k link (i.e. he have a router A connected to other router B with two separate BRI ports, bri0 and bri1 for routerA, bri3 and bri4 for routerB). This is possible,...
I have set up a CISCO 3640 as a RAS. This has 4 ordinary async modems, an 8 port BRI (NM-8B-S/T) and 6 Digital Modems (NM-6DM). I can dial into the async modems fine and authenticate without any problems. However with the digital modems I can never t...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-17-2024 11:08 AM | ||
07-17-2024 06:07 AM | ||
05-29-2024 04:52 AM | ||
02-14-2024 04:00 AM | ||
11-10-2023 09:28 AM |