Other Network Architecture Subjects

I am using a tanberg Cisco Codec C40 and I need todo some tests on it which requires to put the codec under a tension of 140 VAC for 60 Hz. In the datasheet it is said :"100–240 VAC, 50/60 Hz "does that mean that it would still be safe if I put a ten...

Hi I had a blackout and this switch ws-c2950sx-48-si doesn´t work well , so I get just thisSwitch: flash_init Initializing Flash... flashfs[0]: 0 files, 1 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 77414...

Hi alI ,I have a customer that already has 1121G Ap  autonomous deployed, I will convert them  to Lightwight ones and install a 4402 controller and will add other 1041N ap THAT will be controlled by the controller in teh same time.Does any one tested...

Hi,I wonder how to change the universal IOS version on a router 881 from -npe ( no payload encryption ) type to standard ( payload encryption ) type ?I have tried with Cisco  licencing team without success.  We have no restriction regarding encriptio...

Welcome to the Cisco Networking Professionals Ask the Expert conversation. This is an opportunity to discuss with Cisco expert Reza Malekzadeh about Network Admission Control (NAC) which uses the network infrastructure to enforce security policy comp...

Hello, I have a query regarding box-to-box redundancy - What will be the status of circuits in redundant CSS? Currently I have couple of CSS configured for box-to-box redundancy. The primary works just fine, while all the circuits on secondary are sh...

Hi,Can someone please help me with configuration of ACL with below requirements.Please set an ACL for the host 10.170.79.120 for all portsIncoming traffic to host 10.170.79.120 is allowed from everywhere.Outgoing traffic from host 10.170.79.120 is on...

I see the WS-SVC-AGM-1-K9  was EOL  Jan 2010What is the suggested Product Migration Option?Also if anyone is using this WS-SVC-AGM-1-K9 I would like some feedbackOur problem is listed below and we are wondering of the WS-SVC-AGM-1-K9 will work ? /...

would like to know if there is an instance that would make a switch flap and would contribute to high cpu utilization if its only connected to a server.. its port is configured in port channel..and would eventually contribute to flapping if switch is...

Hi,There is a remote server that downloads info from a server here at HQ. When the dowloads start the rxload on the S0/0/0 interface jumps to 98 percent or so; rxload 250/255. I needed to limit the bandwidth utilization between the servers, so I adde...

anyone knows this massage from a WS-C3548-XL-EN ?%LINEPROTO-CLUSTER_MEMBER_1-5-UPDOWN: Line protocol on Interface FastEthern

I'm spreading myself thin on the ground, trawling Forums and Message Boards around telecommunications and CRM/CTI to introduce my publication which provides a complete overview to the Genesys Laboratories Technologies, Solutions, Products and Framewo...

Hi,I'd like to implement QoS feature on ADSL interface.So the upload and download value are different.How can i setup the bandwidth attribute, distinguish upload and download?Conf:Interface fastethernet 4     bandwidth 8000     service-policy output ...

Please I need to know what I will do my CCNP cert was expired.