Dear All:I am trying to transfer the IOS image from Cisco 7609 router via tftp as a backup but it stops and having an error message of "timeout error".Any Ideas.Thanks.
Hello there,Does anyone please advice me why software upgrade on supervisor engine redundancy has to operate in RPR mode? Can we do in SSO mode?I have seen it on Catalyst 4500 Series Switch Cisco IOS Software Configuration Guide but did not see any e...
Hi. I have a customer that's having issues with 2 new Catalyst Express 500 switches. It seems that whenever we enable the Smartport functionality on any ports on the switch whatever is plugged into that port can no longer communicate to the network.F...
Hi all, a quick question, If I have a /24 address given to me, can I subnet this down to different networks but still be able to use the whole /24 network as well ? or wouldnt this be advisable once you have subnetted it down ?
We are using cisco 7301 with turned on compiled access-lists for a long time, cause it gives significant impact on perfomance, due to long access-list.But recenlty we've faced a problem, that sometimes when we performing some minor changes in ACLs (u...
I am trying to configure a 3825 router w/IOS 12.4(3d).When I install a GLC-SX-MM module, I cannot see the module in the sh diag results and therefore not a choice in the list of interfaces.When I view the logs, the insertion is logged.Any assistance ...
Dear all,We are doing maintenance for our networks which contents the followingCisco 3550 series switchesCisco 2900 series switchesCisco 2950 series switchesCisco LRE switches 2950 seriesCisco router 1811 Cisco router 1750Cisco router 2600Now, I woul...
Hi allI have a 2900 XL switch. I tried to connect a computer to a switchport and the port led did not light up.1. Can i say that the switchport is faulty? 2. If i do not plug in any PC to a switchport. Will I get line is administratively up and line ...
I have 2 6509s, CATOS on one, IOS Native on the other, both on different vtp domains. Attempting to etherchannel between both. When enabling the 1st interface in the channel group, the interface goes to admin-down w/ the following error:%EC-5-STAYDOW...
Hi,I have deleted nvram file system and reloaded the switch.switch is showing following message:Switch#erase nvSwitch#erase nvram: ? <cr>Switch#erase nvram:Erasing the nvram filesystem will remove all configuration files! Continue? [confirm][OK]Eras...
I am missing something really simple, but for the life of me I cant figure it out. I have a 23 port etherswitch with 3 vlans 2 of which I will eventually connect back to a vpn and the 3rd (vlan 100) I want to throw out the local internet only.My pro...
I have a few questions pertaining to Conditional advertisements in BGP using advertise-map(s). From the Cisco site the examples I have seen stipulate that the routes you redistribute into BGP are through the means of "network" statements. The first...
